ScoobyNet.com - Subaru Enthusiast Forum

ScoobyNet.com - Subaru Enthusiast Forum (https://www.scoobynet.com/)
-   Non Scooby Related (https://www.scoobynet.com/non-scooby-related-4/)
-   -   Chamois..how do you clean yours ? (https://www.scoobynet.com/non-scooby-related-4/314532-chamois-how-do-you-clean-yours.html)

f1 28 March 2004 08:38 PM

Chamois..how do you clean yours ?
 
As title really, went to CostCo and got me a couple of nice new Chamois', so we all wash our cars with the best stuff, but how do we clean our Chamois' ??? Just wondered 'cos when mine get too bad I just chuck 'em !!

Chip 28 March 2004 08:40 PM


Originally Posted by f1
As title really, went to CostCo and got me a couple of nice new Chamois', so we all wash our cars with the best stuff, but how do we clean our Chamois' ??? Just wondered 'cos when mine get too bad I just chuck 'em !!

I just rinse mine in clean warm water after every use and during use.

Chip

Chris_ 28 March 2004 08:47 PM

I just chuck mine too. To make them last, keep them moist by sticking them in a plastic bag after use.

scoobyvirgin 28 March 2004 09:11 PM

I've got a couple of Flunky leathers. Usually stick them under the windscreen wiper and pressure wash them with warm water. They Come up a treat and it's not even wrecked them.

Redkop 28 March 2004 09:35 PM

Rinse them out, then do same as Chris, keep them in a polythene bag.

john_s 28 March 2004 10:10 PM

Just had to sling mine, it was falling to pieces.

Uh-oh.... going to have to go to halfords!

John.

Fulham71 29 March 2004 07:33 AM

I would suggest drying your car with an old bath towel
Wash it first without conditioner & you will be amazed how much water it can pick up !
NO more standing there & squeezing out
I guarantee it will reduce your drying time considerably & will dry even better
Then when you have finished wash it again & it will be free of dirt & grit for next time ;)

alcazar 29 March 2004 08:23 AM

Are the posts about keeping your chammy wet, serious?


If it's a real chammy, not a fake, it'll rot if you don't let it dry out, and if it's in the car, it'll stink, big time.

Alcazar

brickboy 29 March 2004 09:25 AM

Cleaning a chamois is like making love to a beautiful woman ... first make sure it's good and wet, then knead it gently to get rid of any grit and dirt. Then squeeze it firmly. When you've got rid of all the drips, make sure you spread it out to dry or it'll start to stink.

;):D

Karl 227 29 March 2004 09:30 AM

PMSL@ brickboy :D

ajm 29 March 2004 09:48 AM

Yeah, I rinse mine in fresh water then spread it out to dry. If you let it dry all scrunched up you will fray it next time you use it because they go like cardboard and water won't be able to get to the centre to soften it before you start trying to unfold it.

r32 29 March 2004 11:24 AM

Dont put them away wet, they will rot and fall to pieces, they will also cover you motor in tiny bits of Chamois.
Just rinse in clean water, any addition of soap will hasten its demise slightly, it really shouldnt get dirty, you should only be picking up clean water off your motor. It will get black marks off your seals and things but these dont affect its function. Spread the leather out and let it dry out, no radiators.
Also do not wring out a leather but squeeze it to remove the water, wringing will stretch the chamois and make it go thin. Buy a quality chamois like a Pittards.
STEVE, from the society for the protection of chamois leathers!

CrisPDuk 29 March 2004 02:41 PM

I also use the Fulham71 technique:)

STi-Frenchie 29 March 2004 03:22 PM

I wash with a Chamois (rinse it out leave it flat over the bucket to dry), hose the car down with a power washer, waterblade off the excess water and dry down with an old terry towel. Beautiful results every time :)

Tiggs 29 March 2004 05:34 PM

use a water balde on the bmw and the tvr prior to that....wouldnt go near them with some old bit of leather that takes ages to do the same job!

i could dry the tvr in 30secs!

NotoriousREV 29 March 2004 05:41 PM

I clean mine the same way I clean other members of the gazelle family, hose pipe and a stiff brush

Nigel H 29 March 2004 08:21 PM

Another vote for the Fulham method ;)

I use a water blade first and then polish it off with an old muslin square which are really abosorbent. Cheaper and better than a chammy IMHO

carl 29 March 2004 08:41 PM

Tried the water blade + towel but it didn't work too well, so move on to water blade + chamois. Seems to do the trick, but some of the curves on the TVR and the CC are a bit much for the blade so require use of the chamois.

Fulham71 29 March 2004 08:43 PM

Carl did you wash the towel with conditioner ?
if so that could be your problem !
nothing safer than a towel as you can wash it after each use to ensure no deposits are left in it !

StickyMicky 29 March 2004 08:56 PM

never liked the real ones

always preferd a flunkey
my method is to preasure wash them if the gear is out or run them under a warm tap and rinse (not half as good)

Fat Boy 29 March 2004 08:57 PM

I find if I give it a good wipe down with a damp chamois it comes up a treat.

Nigel H 30 March 2004 06:34 AM

I found that the type of towel used makes a big difference - I must have tried about 10 before I found the muslin squares. If the towel doesn't absorb well its a complete waste of time

Alan C 30 March 2004 06:50 AM

Back to the original question :rolleyes: ;)

Lay it flat on the ground and jet wash it.

Brings out the ingrained dirt a treat. It also lifts and fluffs up the outer 'skin' to give a better surface area..

A tip from mate of mine who used to run ahand car wash in Cyprus.. a pro you might say..


All times are GMT +1. The time now is 06:08 AM.


© 2024 MH Sub I, LLC dba Internet Brands