ScoobyNet.com - Subaru Enthusiast Forum

ScoobyNet.com - Subaru Enthusiast Forum (https://www.scoobynet.com/)
-   General Technical (https://www.scoobynet.com/general-technical-10/)
-   -   FP Reg fitting on MY02? Help! (https://www.scoobynet.com/general-technical-10/304502-fp-reg-fitting-on-my02-help.html)

Absolute Shower 23 February 2004 02:29 PM

FP Reg fitting on MY02? Help!
 
Anyone fitted FPR on MY02 New Age? Any pics would be good....

Is the OE reg just under the inlet pipe (near MAF)...It's got a vacuum pipe connected to manifold.

What are the petrol lines for on the right hand side of engine bay...one's for fuel in, via the filter (top line)...

Midlife...... 23 February 2004 05:08 PM

I have had my FPR fitted to the right of the intercooler on my MY02. the guy ran some extra fuel lines under the front strut brace which Bob Rawle noticed.

Bob said that there was a neater way of fitting the FPR but to be honest I was so excited about the re-map I can't remember. There's obviously several ways of fitting them...mine not being the neatest way !!


I wonder if bob could remember ?

Midlife.....

Absolute Shower 24 February 2004 04:44 PM

Hmm, thought the fitting to the right of IC was for classics as the OE reg is by the turbo - nightmare place to fit a new FPR.

I'm just needing to confirm the OE FPR is at the front left side of the engine....I'm 90% sure it is and I've worked out the fuel line and the return...which goes into the engine block.

Midlife...... 24 February 2004 04:57 PM

I was going to send you a pic of where mine went but you have the address blocked, I would have thought it a bit tricky to fit the new FPR on the turbo side.

Alyn at AS performance might be helpful here as I think he fitted one for Ninnybobs as well as his TD05 etc.

Midlife.....


All times are GMT +1. The time now is 02:43 PM.


© 2024 MH Sub I, LLC dba Internet Brands