ecu remap
hi
advice on a remap for an sti typ r v limited 5 1. cost 2. where to as close to south wales as possible thanks |
power engineering
cost around 680 to 720 ,dependent on how much u sweet talk them Br developments , cost 750 , better mapper , but the bottom line is bloke for Br developments cracked the ecu re-map code first,in the UK but used to work for powerenginnering or something like that anyway ,but the point being there the best mappers in the UK that are nearest or even point blank BR Developments map on the road Power enginnering map on the ramp, Personnelly map on the road would be better (real driving conditions) Had mine done on the ramp, they did a great job,but i cant stop thinking they just used the settings from a scoob earlier that they had with the same mods, plus the car seemed to be left to cool down alot rather than lots of button pushing on a laptop in my drivers seat. Go Br developments, aparently there better,there always booked up, and it looks like you get yours moneys worth. good luck m8 |
|
i was at power engineering on tuesday asking about remaps, they said they wouldn't touch my sti 5 for fear of it being too 'fragile' an engine
might try BR developments chris |
BR Developments have an excellent reputation, and I believe that they work out of Swindon, which is somewhat closer to you than Power Engineering.
|
Speak to Bob or Branko at B R Developments, getting my car done there this March. A mate and fellow scoobynetter who has the same car as you and I, has just had his done there and is still grinning.
simb |
speak to branko he`s friendly, bobs not nice but knows more than anyone
|
Virgin
Whaaaaaaaaaaaat ?? "bobs not nice".......... are we speaking about the same person ?? Words fail me Bob Rawle TeK3'd my Bugeye with TDo5 etc like a complete Professional / gentleman. Still lost for words on that last post..... Midlife..... |
Farmer WRX
Calmed down now ...Get Guru Bob to map it for the road :D :D :D :D Is you MY year better mapped with a Link ECU ?? Midlife..... |
Bob mapped my STi V (so far the non fragile engine model!) last year and It recently produced 307bhp and 310 lbft on Prosports rollers. A nicer and more knowledgable bloke you couldn't hope to meet. Branko can sometimes wind people up the wrong way (doesn't suffer fools gladly) but he's a top bloke when you meet him. He drove my car while Bob carried out the re-mapping. Me and my mate sat in the back - I didn't have my eyes closed all the time. It's an interesting experience - 7000 rpm in 4th on the Swindon dual carriageways in Saturday afternoon traffic ;-)
|
speak to branko he`s friendly, bobs not nice but knows more than anyone |
Would this be benificial on a 93wrx import...
I thought supply and map would be around the £1500 mark, i could be tempted for the £700 mark... Cheers, John. |
TEK3 is only avail for MY99 onwards
|
Greeno - perhaps you were thinking of the Link ECU? I believe that Bob's also got a good reputation for Link mapping. Best to ask BRD what's available for your model of car. Or, just post a thread asking that question in the General Technical forum.
|
Gothinducky - What Ecu did you have with those results or did you acheive those results from a Tek 3?
simb |
Bob rawle of BRD Developments gets my vote
cal |
simb,
Std ECU with TEK3 upgrade. My car also has a scoobysport downpipe and backbox, but that's it. Nick. |
BOB HAS GIVEN ME SOME GOOD ADVICE OVER THE YEARS THROUGH EMAILS.AND IVE NEVER MET HIM.P E WAS GOOD WHEN MERVE WAS THERE .DONT KNOW ANYONE ELSE
GOOD SERVICE THOUGH. |
Cheers Nick, if I can acheive that lbft figure you've got, i'll be well chuffed.
simb |
whats the difference on a Link ECU to a Tec 3? or are they the same?
Phil interested in attending SCOOBY BALL 3? Email me at info@neoquip.com for full details... 13th March 2004 |
The Link ecu is a new Ecu in replace of the standard one and then mapped to your car, the Tek 3 is a Re-map of your existing Ecu.
simb |
oh.. so Tec3.. could keep your warranty?. as no one would know you'v been 'altered'?
Phil interested in attending SCOOBY BALL 3? Email me at info@neoquip.com for full details... 13th March 2004 |
Not too sure on that, they could proberly tell from the boost being increased.
simb |
AFAIK TEK3 undetectable with select, but as simb quite rightly points out boost level is a giveaway, Nick, interesting choice of usernames mate, must find out what it means :D
|
so are Tec 3 selectable as ON or OFF?
is it an option if you have Tec 3 fitted ;) Phil Interested in SCOOBY BALL3? email me at info@neoquip.com for more info - 13th March 2004 |
No phil, its not switchable, just full on!!! :D
|
Heard a rumour that you can switch between original and new TeK maps by fully depressing throttle and toggling the rear screen heater.
Midlife.... |
What amazes me is that some people must think they can turn off the mega-map so the car runs as though it's never been touched and then go into a dealers with a drainpipe exhaust on you can hear for miles, a full decat and countless knows whatever other tweaks ;) and claim it's "standard"... :D
|
Originally Posted by Apple
What amazes me is that some people must think they can turn off the mega-map so the car runs as though it's never been touched and then go into a dealers with a drainpipe exhaust on you can hear for miles, a full decat and countless knows whatever other tweaks ;) and claim it's "standard"... :D
not that id condone that of course... |
Apple.. you mean you can't? lol
|
All times are GMT +1. The time now is 07:13 AM. |
© 2024 MH Sub I, LLC dba Internet Brands