ScoobyNet.com - Subaru Enthusiast Forum

ScoobyNet.com - Subaru Enthusiast Forum (https://www.scoobynet.com/)
-   General Technical (https://www.scoobynet.com/general-technical-10/)
-   -   Cutting out after cleaning out Boost solonoid (https://www.scoobynet.com/general-technical-10/293275-cutting-out-after-cleaning-out-boost-solonoid.html)

Jap Imports 19 January 2004 09:39 PM

Has now cut out 3 times while on accelerating after i cleaned my Boost Solonid on Saturday, 1 once sat straight after i did it and 2 times yesturday. Its like it might be over boosting. I have got to get a boost gauge cause im not sure if it is.

Help :)

Kevin Groat 19 January 2004 10:25 PM

Did you overfill the oil and that's why you had to clean the solenoid? - just asking as that's what happened to my car when I bought it. Garage put in too much oil, I had to drop out 0.5'ish of a litre and clean out the solenoid valve and pipework. Had to do it a few times - found it worked best cleaning with solvent and quickly sticking the hose back on and giving it some revs.

Kevin.

Bob Rawle 19 January 2004 10:25 PM

It will be just that, as an experiment try restricting the went pipe from the boost solenoid, the one that comes from the bottom of the solenoid, don't block it but sat pinch to restrict, see if that helps, if so than thats the problem.

bob


All times are GMT +1. The time now is 11:05 AM.


© 2024 MH Sub I, LLC dba Internet Brands