anyone replaced their oem front discs 294mm with the ebc turbo groove ones?
any comments on these plus their redstuff pads would be aprecciated. mike |
The disc is okay,but stay away from the pads,they just donīt work.
When they are cold they donīt work ,and as soon as you will use them just a bit ,then there is too much heat ,and then they donīt work You can get the discs and then some Ferrodo DS2500 and it will be great Skassa [Edited by Denmark - 12/30/2003 4:12:10 PM] |
Not sure your info is up to date on the EBC pads. They now have new compounds available in green and red varients. A few of us tested these for EBC and were very impressed (i had a set of pads and discs previously and was not impressed at all). John Felstead was impressed with them and he definately gives them a hard time.
Tony.b |
thanks for the replies guys.
i was thinking of using the red ones for the front and the green ones for the rear,what do u think? i dont do track days just a bit of hillclimbing. |
i have EBC group N groove and drilled discs all round, red pads on front and rears are standard, stops just fine 4 me
|
All times are GMT +1. The time now is 01:51 PM. |
© 2024 MH Sub I, LLC dba Internet Brands