Can someone please email me a copy of the complete Sigma M30 Operating and Instruction manual so that I can determine what all the 'beeps' mean. I guess the Subaru version that I have is an abridged version
Thanks In Advance

Let me see if I can find it on my machine, if I can I will mail it over.

Ian,
Don't look to hard - I've sent a copy :D

Chris

Cheers Chris,

Had a quick look when I posted, but was just about to sort it out now.

Ian

i'm having a bit of a problem with the alarm on my vehicle, neither remote keyfob is operating the alarm (batteries ok). I've read about the alarms "losing" their code. Is there anything in the alarm manual that covers how to re-code or re-programme the alarm ecu/remotes. Perhaps using the keypad in conjunction with a specific procedure?

Thanks in advance.

a_kerr@msn.com

RB5,
There is mate.
Unfortunatly I'm on holiday at the mo and the manual is on my works computer.
Drop me a E mail as per profile and I'll send you a copy of the manual on my return (8th Dec).
Chris

please could someone send me a coppy of the sigma manual as i diddant get any paperwork when i got my scooby id like 2 no wot it dose and how 2 use it propaly thank u ?

Could I have a copy toooooo pleeeeeease :-))))

PM Sent to you both :thumb:

Thanks bud

Readily available.........

http://www.scoobypedia.co.uk/uploads...m30_manual.pdf

http://www.scoobypedia.co.uk/uploads..._m30_codes.pdf

Server not found

Firefox can't find the server at www.scoobypedia.co.uk.

bugger



anyone got this pdf?

Will email it to you Jodie :thumb:

ty Don

Can anyone send me the installation manual?

I have a old Porsche I brought to the UK about 15 years ago and took it home to the US. I want to pull my old M30 out and leave the car intact.

Simple just remove it one wire at a time and where a wire has been cut and wires from the alarm are connected just reconnect them
a wiring diagram wont really help

Ian

Thanks Ian, that does simplify things.

So then, if I unplug the wires from the immobilizer and the CDL unit - will that completely disable them?

Nooo like i said you will need to find the car wire that has been cut and alarm wires attached to the cut wires these are immobilisers cuts
Ian

As Ian says a number of circuit supplies (eg Fuel pump) will have the alarm wiring spliced into it so that the alarm can isolate it by use of an internal relay /circuit.

If you just unplug the cables from the alarm module you will leave that supply open circuit.

You need to trace each alarm wire to where it connects to the loom and re-make any cuts..........................

Got it out - anyone want it?
 

Hey, I got my Sigma M30 out of my car. :luxhello:

It did work and I did keep everything fairly well intact. If you are interested in it - let me know. I have no idea of it's value and money isn't everything. Interesting trades considered. I have 1973 911 - so any Porsche parts are always welcome.

Cheers,

Harry