This is something I have thought about doing at some stage.
My main concern is the thought of putting stress somewhere else in the car when [trying] to put the car through its paces at the Pod or on track days. Were you told of any possible negative attributes when buying your clutch. Not a slur intended toward Scoobymania or AP Racing. I would just like to know. Oh, I've got a MY98. |
Bajie,
I was told that there shouldn't be any problems with the AP Racing replacement clutch. If there had been, I wouldn't have gone ahead with the purchase. It is a known fact that the Scooby gearbox is not exactly the strongest component within the car, so this is why I went for the clutch that I did, rather than a fierce paddle type (a la 22B), which puts additional stress on the already weak gearbox. The clutch is £337 + VAT and only £150 to fit (about six hours work), so now with a beefier clutch, I can't wait to get my Possum Link installed! http://bbs.scoobynet.co.uk/wink.gif Regards, TK http://bbs.scoobynet.co.uk/smile.gif |
Dear all,
My poor Scooby had recently been suffering from clutch slip (at peak torque in the higher gears, esp.) http://bbs.scoobynet.co.uk/frown.gif It is difficult to describe just how frustrating this can be, when the rest of the car works so beautifully!! I looked around at alternatives and decided upon the AP Racing clutch, supplied by Ben at ScoobyMania. The clutch had to be able to handle 350BHP & 350 lb/ft torque. I was amazed at the results!! http://bbs.scoobynet.co.uk/smile.gif The pedal is actually lighter in operation than with the standard STi5 unit! It has a very progressive feel and when it bites, it bites! Gear changes seem smoother, with less stress on the gearbox and I'm now able to slow the gear change down a little and still get the same progress. Ace. The clutch is way cheaper than the "official" upgraded STi clutch and in my opinion couldn't possibly be as good! http://bbs.scoobynet.co.uk/wink.gif If anyone would like any more info on this mod. or more details on my findings just let me know. Regards, http://bbs.scoobynet.co.uk/smile.gif Tim http://bbs.scoobynet.co.uk/smile.gif [This message has been edited by TimK (edited 20-12-1999).] |
Howdy..
Glad you are happy with it http://bbs.scoobynet.co.uk/smile.gif What did you actually change ? Friction Plate ? Pressure/Cover Plate ? Release bearing ? What was included in the kit ? Standard fly wheel ? J. |
J,
The kit comprised : Pressure / Cover plate and also the Friction plate. I also made sure a new release bearing was fitted (about £70 from a Subaru dealer). I used the standard flywheel, as after only 8,000 miles it didn't look as if it needed skimming. Kind regards, Tim http://bbs.scoobynet.co.uk/smile.gif |
All times are GMT +1. The time now is 10:38 PM. |
© 2024 MH Sub I, LLC dba Internet Brands