Is it true that you loose around 70BHP! on your scoob through transmission and 4 wheel drive?
Therefore if a scoob has 250BHP at the flywheel its probabably only got 180BHP at the wheels....taking an average weight of a scoob say 1200kg (probably heavier) thats 150BHP per tonne. My mates Moddded Clio Williams made 150BHP at the wheels the other day, and weighing in at a mere 900kg thats 167BHP per tonne. Going by the above estimates the Clio would win in a straight line???? Reason I'm asking is that he wants to give me a go down a straight (on a private road of course), my scoob has approx 250BHP with full zorst and induction kit.....judging by the above calculations he will beat me????? If i'm talking total bollo**s let me know. Ray |
Never underestimate a clio!!
You should get a better start but dont think you will lose him on a long straight. I had a Blat with a Turbo Clio which was putting out 250hp, in my old WRX. I had difficulty getting away from him.. At the time i would estimate i had about 350hp.. Rob Not quite the same as the Clio was turbocharged but given my power and yours the logic is the same. |
its one thing having the power and its another getting it down!
with you having 4 wheel drive you will be able to get off the line a lot quicker than a high power fwd car, it makes all the difference on a q/mile run ;) |
yeah tweenierob
He ran a 14.4 quater mile at York a couple of months ago it is a fast little car...plus with his coilovers dropped to the floor its very good round the twisties. Ray |
14.4 is good for a clio, watch out:D:D
Rob p.s. 1/4 mile is different... with the 4WD system you should spit tarmac at the clio ;) |
If you launch between 4000 - 5000rpm you'll thrash him. You'll be 3 cars length ahead of him by the time he stops wheel spinning.
When I dump the clutch at 5000rpm in my Type R, all hell breaks loose. I can't imagine many 2 wheel drive cars beating me off the line. |
Reason I'm asking is that he wants to give me a go down a straight (on a private road of course), my scoob has approx 250BHP with full zorst and induction kit.....judging by the above calculations he will beat me????? |
All times are GMT +1. The time now is 01:08 AM. |
© 2024 MH Sub I, LLC dba Internet Brands