Hi,

Technically what's involved in removing the Scoobysport CEL fix?

I need to restore my MY01 to its original state, which includes removing the uppipe, downpipe and CEL fix.

Thanks,
Gareth

Lift the carpet in the passenger footwell.
Remove metal plate covering ECU.
Remove insulation tape covering soldered joints from CEL fix to ECU wiring.
Unsolder the wires from the CEL to ECU wires.
You will be left with 2 wire cut that needs soldering together. One wire goes into the loom the other into the ECU connector.
Use insulation tape to cover cut wires

If in doubt speak to Scoobysport, I'm sure they can help.

Best regards,

Ian

Thanks Ian - that looks straightforward enough even for me.

G

Spot on Ian :)