MY98, registered december.
where the hell is it? I've been told its pin 1, green with black trace - no green/black wire on pin 1 on ecu, on any of the connectors (three that go into it). One connector is labelled B37, nothing on the others or indeed any pin numbers. On the blue/yellow wire goin into the middle connector going into the control panel... - NO blue/yellow wire there. And its getting too dark after work to see any bloody thing. One wire. Where is it???? |
might be able to help here. i'll email you a diagram someone passed onto me. according to this , it's the middle connecter block , bottom right , but doesn't state wot colour. will forward you the diagram.
|
cheers pete, that diagram was spot on. ten minutes later, the sta nav is working off the speed pulse - so easy when you know which wire it is!!
thanks again simon |
no problem mate.
|
Hi guys, can you mail me the diagram??
I have a sat nav to fit too but wondered about the same wire.. Thanks in advance :) |
Can i have a copy of that diagram too?!
Howard hcrobinson@email.com |
Can i have a copy of that diagram too?!
Howard hcrobinson@email.com |
http://www.apexi-usa.com/productdocumentation/electronics_savcr_wire.pdf
|
All times are GMT +1. The time now is 04:33 AM. |
© 2024 MH Sub I, LLC dba Internet Brands