ScoobyNet.com - Subaru Enthusiast Forum

ScoobyNet.com - Subaru Enthusiast Forum (https://www.scoobynet.com/)
-   ScoobyNet General (https://www.scoobynet.com/scoobynet-general-1/)
-   -   2 dipsticks? (https://www.scoobynet.com/scoobynet-general-1/252693-2-dipsticks.html)

scoobytypeR 21 September 2003 12:26 PM

Just checking all the levels under the bonnet of my sexy new scoob type R and noticed there is a dipstick, a funny shaped bugger, under the intercooler...what's that for?

Checked it anyway and it's a mm under full level, so that seems ok.

any ideas?

Matt

WagonRich 21 September 2003 12:28 PM

Gearbox oil.

Rich

russell hayward 21 September 2003 12:28 PM

Gearbox

scoobytypeR 21 September 2003 01:43 PM

cheers lads.....much appreciated.

Matt

gashair 22 September 2003 10:20 AM

where do you top it up from then?

GrahameS 22 September 2003 10:55 AM

In a moment of sheer genius, Subaru saw fit that you should
top it up through the dipstick hole :rolleyes:

'Using a funnel and a legth of flexible hose' IIRC.

[Edited by GrahameS - 9/22/2003 10:55:56 AM]

johnfelstead 22 September 2003 10:59 AM

its a damn site easier to top up than any other gearbox i have come accross in 20 years of driving. Most cars you have to crawl under the car and remove a filler plug then squeeze a bottle until it dribbles out the fill plug. Most cars dont have a gearbox dipstic either.

People give Subaru designs a hard time, even when they get it right! :rolleyes:

GrahameS 22 September 2003 11:03 AM

Granted it may well be a lot better than many other cars,
but it is still cr@p !!

- In MY opinion... :)

johnfelstead 22 September 2003 11:16 AM

OK genius, how would you design it?

Scooby96 22 September 2003 11:19 AM

Gear box filler cap inside the cabin - under a little hatch just behind or in front of the gear shifter would be my idea. A nice billet ali filler cap to boot too!

GrahameS 22 September 2003 11:22 AM

Not claiming to be a genius !!!!

First thought....Why didn't they just make the steel tube
and dipstick longer so that it was higher up and easy to get
to just by use of a funnel....

I was just expressing an opinion...chill out! :rolleyes:

Scooby96 22 September 2003 11:29 AM

weight saving would be my guess - would save all of about 25g :)

johnfelstead 22 September 2003 11:29 AM

it will be that size, length for production line instalation reasons. Considering you only need to fill these at a major service unless you have a bad leak which should be repaired, having a dipstick that is easy to use when you consider how tightly packed an Impreza engine bay is, is a pretty good feat IMHO. :D

Dont spill any oil in your cabin, gearbox oil stinks. :D

Scooby96 22 September 2003 11:33 AM

Better designed gear box oil bottles would naturally follow such a an idea, however being Subaru I would hazard a guess would come at a premium!!

GrahameS 22 September 2003 11:35 AM

Maybe it was a Friday afternoon, and the designer just
wanted to get out for a few britneys :D :D

Know thats what i'm like on a friday :)


All times are GMT +1. The time now is 04:14 PM.


© 2024 MH Sub I, LLC dba Internet Brands