And one know how to convert boost pressure from KPa to PSI.
As on me ecu controller it is is KPa

Multiply by 0.145

1Pa = 1.4508 x 10-4 (10 to the power of -4) PSI

Peter

Paul's answer was a bit more direct than mine :)

BTW 100 kPA = 1 bar if you want an easier conversion since bar is commonly used for boost pressure.

1 bar = ~14.5 PSI

4 Replies within 2 minues :eek:

Obviously not much work going on :)

Well accordin to the Ecu is is runnin 215kpa so it works out at 31 PSI think that might be too much

KPa multiplyed by 14.22 ie 0.5KPa = 7.11psig 1KPa = 14.22psig

If it is only 14 psu then i can live with that. Sez the boost limit is 249 which i think works out at 17.5 PSI???