ScoobyNet.com - Subaru Enthusiast Forum

ScoobyNet.com - Subaru Enthusiast Forum (https://www.scoobynet.com/)
-   Interior (https://www.scoobynet.com/interior-15/)
-   -   Knocklink info re fitting (https://www.scoobynet.com/interior-15/222195-knocklink-info-re-fitting.html)

M0NEY 21 June 2003 05:57 PM
Right for you guys about to get a knocklink (and possibly lamdalink), here is some info you might want to read up on when fitting.

Clicky 1

Clicky 2

Clicky 3

Krade 22 June 2003 02:18 AM
Nice one money :)

Brun 25 June 2003 04:09 PM
Oh pooh! Do i really have to buy a longer bolt? I was hoping to fit it this aft :(

Paul_M 25 June 2003 06:06 PM
Yep, the existing bolt is only about as long as the depth of the sensor so you will have no threads left over to go into the block!

Brun 25 June 2003 11:36 PM
Cheera Paul :D

Group buy on bolts? ;)

DaveMcC 27 June 2003 02:04 PM
About £1.80 from Homebase for a pack of M8 x 40mm - but you then need to cut one down by about 7mm. Didn't take long though.

Dave

Brun 28 June 2003 11:37 AM
What about an in line fuse? I've seen it mentioned in a couple of threads! If i wire it to the fag lighter for instance then isn't it covered by that fuse?

:D

S.B. 28 June 2003 07:23 PM
What about an in line fuse? I've seen it mentioned in a couple of threads! If i wire it to the fag lighter for instance then isn't it covered by that fuse?
The fuse for the fag lighter has got a higher rating than you need for the knocklink and it wouldnt blow quick enough if you have a problem with it.

Brun 28 June 2003 07:45 PM
So which fuse is for me? :D

JayTee 18 August 2003 02:12 PM
Back to the top for everyone on the latest group buy...


All times are GMT +1. The time now is 12:50 AM.


© 2024 MH Sub I, LLC dba Internet Brands