ScoobyNet.com - Subaru Enthusiast Forum

ScoobyNet.com - Subaru Enthusiast Forum (https://www.scoobynet.com/)
-   Computer & Technology Related (https://www.scoobynet.com/computer-and-technology-related-34/)
-   -   Home network Design (https://www.scoobynet.com/computer-and-technology-related-34/220788-home-network-design.html)

super_si 17 June 2003 12:58 PM

--------------------------------------------------------------------------------
Got a home network.

4 Port Router
1 PC (Mine on the 2nd Floor)
2 PC's on the 1st floor + router.

The router is 20m or so from my room.Got a cable at the moment but i want 2 net connections.

Do i
a) buy another huge cable and use the last port?
b) can i buy one from wall plugs(Rj45 ethernet wall socket for 2 ports), But would i need 2 lines or wire going to that or could i share one somehow?

Here diagram

PC1+2 are 1st floor.

Si

Dotted proposed idea


[Edited by super_si - 6/17/2003 12:59:11 PM]

Scooby-Doo 17 June 2003 01:03 PM

Buy a second router and use the uplink connection between the routers. £40 and your done in 2 minutes.

Jye 17 June 2003 02:57 PM

Cant you just use the existing routers uplink port and buy a length of crossover?

[Edited by Jye - 6/17/2003 2:58:00 PM]

super_si 17 June 2003 03:00 PM

yeah but then no scope for upgrade.

2 * PS2's in the house + i want an Xbox.

Got a possible 6-7 devices :!

Think thats what im going to do anyway Jye just run another cable.

carl 17 June 2003 06:45 PM

Wireless

super_si 17 June 2003 06:46 PM

Carl :cool:

ive being looking at them actually.

I like netgear im looking at the Here

What else would i need?

Also would it work from down stairs? + compatable with PS2?

Si

IanW 18 June 2003 03:37 AM

Put another hub downstairs, thus leaving you 3 ports avaliable on the router upstairs and another few ports avaliable downstairs.

super_si 18 June 2003 07:29 AM

Cheers ian think im gonna put 8 port switch in my room. That way i can drop cables down to my brothers room and enough scope to upgrade

Si

carl 18 June 2003 07:40 PM


What else would i need?

Also would it work from down stairs? + compatable with PS2?
You'd need one of the "all in one" boxes (router/firewall/hub/access point), and a wireless card in each station. PCI or USB cards for desktops, PCMCIA cards for laptops. If your router is sited near one of the PCs, obviously you can connect that with a bit of Ethernet cable.

As for working downstairs, what's your house made of? Works fine upstairs/downstairs in our circa-1985 plasterboard house, but siting of the AP/router and antenna positioning is crucial.

Should be compatible with PS2 via an Ethernet->wireless bridge (but they're ludicrously expensive for what they do -- cost almost as much as an AP!)

super_si 18 June 2003 07:46 PM

Might be better just using the old fashioned way then

Si


All times are GMT +1. The time now is 03:28 PM.


© 2024 MH Sub I, LLC dba Internet Brands