does anyone know the size of the spa dual gauges

Cheers

Mark

52mm...
JIM

cheers

Is that the size of the body or is that the size of the face?

I would say both. The face is the same size as the body (52mm), but there is a bezel attach which makes it slightly wider overall.

I can take some measurements of my gauge if you want an exact answer.

Stefan

Thank mate you dont need to measure, just wanting a rough idea to see how many i can get into my dash, along with a nocklink and AFR

Cheers

Just checked my SPA manual. The inside diameter is 52mm, external diameter (inc. bezel) is 58mm.

I can post the pages from the manual if you need them, showing all the measurements - depth, studs sizes, etc..

Stefan

Hi Stefan,

That would be excellent if you could post the pics or email them to me

Thanks

Mark

hi

I have a revolution down pipe on my 94 wrx, does anyone know which exhaust temp gauge and sensor i can get that will fit into the spare hole in the lower portion of the DP. Would an SPA gauge sensor fit?

cheers

Mark

Mark,

I've scanned in the pages out of my SPA Oil pressure/temp manual. You can download them from the following links (all pics are about 200k each).

Pages 2&3
Pages 4&5
Pages 6&7
Pages 16&17
Pages 18&19

Don't know if the SPA EGT sensor will fit your zorst. Best bet is to e-mail/call SPA here in the UK and ask what the size of the thread on their sensor is.

Do you know what it is on the zorst?

Stefan

Thanks Stefan,

Im assuming that the downpipe was made for a later model with the lambda at the top and temp sensor at the bottom, witch are both redundant for me as my lambda is in the front manifold and I don't need cat temp any more. I have them both bunged up. Im assuming its the same size that's on the standard later model but not too sure, I will have to get in touch with revolution and see what they say.

Mark