ScoobyNet.com - Subaru Enthusiast Forum

ScoobyNet.com - Subaru Enthusiast Forum (https://www.scoobynet.com/)
-   Drivetrain (https://www.scoobynet.com/drivetrain-11/)
-   -   6K ecu (https://www.scoobynet.com/drivetrain-11/214153-6k-ecu.html)

sean.howell 28 May 2003 07:42 PM

anyone heard of a 6K ecu, and know what model it is off?

cube 29 May 2003 12:14 AM

Possibly be the Haltech E6K

Try http://www.haltech.com.au/Products/ECUs/ecus.html

Cube.

sean.howell 29 May 2003 07:01 AM

thanks but it is a standard looking ecu case, and just has 6k written on the top, where mine has 2c

hrubago 09 September 2003 11:32 PM

I heard. I have it installed on my car.

Scott.T 10 September 2003 08:19 AM

Find below a list of all ECU I have currently come into contact with, and their origin :

7K is 1996 WRX STi Type RA
Z5 is 1995 WRX Type RA
W9 is 1994/995 WRX Type RA
2C, W6, U8 appear to be 1993-1994 WRX
Z4 is 1995 WRX
V9 is 1993-1994 WRX Wagon
3B is 1995 WRX Wagon

V7 is 1994/1995 UK Saloon or Wagon or Aus WRX
7D is 1993/1994 UK Saloon or Wagon

6D is European Saloon or Wagon

WRX Wagon and Saloon ECU in some cases have been found to be un-compatible
A 7K runs slightly more boost then a Z4, more advance and more fuel.

Genrally I expect most WRX Saloon ECU's to be interchangable, and likewise WRX Wagon.
Although personally I would not swap a 7K into an earlier car due to the the extra advance that it runs (the RA can probably handle it but a stock WRX may not have the smae internals/compression ratio).

For you info the map in a 2C is p:(:(!!!

hrubago 10 September 2003 09:05 AM

Ehhh. Sorry my mistake. I told about E6K Haltech.

But tryied some ECUs. Interchangeable are with the same phase version and the same connector and same pinouts.

Sti Ecu will not work on GT because it has other pins for cam and crank senzor.

Phase 1 ECU will not work on Phase 2 due to different idling system.

Also sometimes problems appears with immobilisers.

Ken Ross 27 September 2003 05:21 PM

I have a 6K in a 1995 STi II

Scott.T 27 September 2003 06:20 PM

Probably similar to a 7K from an STi 2 RA
These can be remapped to 16.5psi

I think these have a socket already fitted in the ECU, but unlike STi 1 the map is on the main board.

A 7K base map peaks at 13.6psi, so I expect the 6K to be similar.


[Edited by Scott.T - 9/27/2003 6:22:26 PM]

ticky 27 September 2003 06:43 PM

I have a 6k ecu in my stiII. Sent a pictures of the mother board to Scott to have a look at & I was told it does not have a socket so i pressume all 6K will be the same. Hopefully soom i will have the re-mapped to 16.5psi, just waiting for my holidays as i use the car to travel to work.


All times are GMT +1. The time now is 09:28 AM.


© 2024 MH Sub I, LLC dba Internet Brands