Can anyone help me, just got a set of 2nd hand defis but no fitting instructions.

All I need is the connections for the main control unit which I think are
Red = Perm Live
Black = Earth
White = Ignition live
Orange = Illumination.

Anyone able to confirm or correct this?

Thanks Rob

Red and black are right, but it's the orange wire for "ignition on" and the white wire for "illumination". :)

There's some great instructions on the link below, which I found invaluable in installing my Control Unit and boost gauge recently.

http://www.defi-shop.com/product/dl/cu2/cu2_top.htm

Many thanks Jimmy for the speedy reply.

Guess I better wait for the rain to stop before I go and make a start.


Cheers Rob

You're welcome.

Don't let the rain put you off, I installed mine whilst it was hammering down - and in semi-darkness, too! :D

Patience is not one of my virtues! ;)

Good link for the instructions, i recently bought the BF range for my scoob and all instructions are in jap. Didnt have a clue where to start until i went on the link above. Now in and working, just getting the EGT probe fitted today.

Mark