Just bought a Apexi AVC-R and am planning on fitting it this friday coming. I am fitting it into a 1995 WRX. Any help, advice or pictures of people that have them fitted etc.. would be of big help as once those ECU wires are cut i got to get it to work. Any help would be much appreciated. Plus when the Apexi is set up, what kind of settings should i be running on my 1995 WRX with the following mods
HKS Sequential Dump Valve HKS Super Power Flow Induction Kit HKS Widened Downpipe HKS Full Hyper Exhaust system |
For starters dont cut any ECU wires just cut the sheath back and colder the apexi wires on then heat shrink or tape up
|
Have you fitted an AVC-R to your car ?
|
I have..
Do not cut wires! you will probably end up removing it one day and it will leave your loom a bit untidy imo. As stated, trim off some of the outer casing to the wires and then solder the AVCR wires to them. Rob |
yer i have fitted one to my pulsar. its fairly straight forward. e-mail if you need any help.
Andy |
All times are GMT +1. The time now is 01:53 AM. |
© 2024 MH Sub I, LLC dba Internet Brands