Prodrive Logo's courtesy of 'Salsa-King'

http://www.rscosworth.homestead.com/files/UKPDREAR.jpg
http://www.rscosworth.homestead.com/files/UKPDSIDE.jpg

Number Plates From

Scott.t

How do you order these stickers , are they from subaru or prodrive ?

The fact that it says 'Prodrive Logo's courtesy of 'Salsa-King', isn't obvious then?

Salsa-King (Guy on this BBS), managed to get hold of some for me.
If no one else does, I'll post his contact e-mail on here tommorrow.


[This message has been edited by Scott.T (edited 29 May 2001).]

Scott

I like the look of that - quick question, how easy is it to remove the rear plate and how did you re-attach the new one as it is stuck to the bumper as opposed to being bolted (like the front).

I have some GB plates arriving soon so wondering how straight forward it will be...

Thanks
Paul

Paul,

Mine was screwed on using Yellow M6 Nylon Bolts.

But when I removed the old one I noticed that the N/Plate can either be screwed on using M6 yellow Bolts, Screwed on using Self-Tapper and Yellow Caps or stuck on as there is room to attach adhesive pads.

If yours is stuck on the try slowly pulling or maybe heat a little with a hair dryer.

U then have the 3 optioned defined above to attach the new one.

If you want to stick it on (which I should of done really) then use the self-adhesive pads that you can by to stick rear view mirrors on.

They come in packs of 2 and you can pick them up in Halfords.

CAN I MAKE IT CLEAR THAT I ONLY GET THESE STICKERS FROM A VINYL CUT LETTERING SHOP THAT SELL'S ANY STICKER YOU WANT!!!!!
IT HAS PRODRIVES ETC ETC ETC + OTHER CAR STUFF, I'M ONLY SENDING THEM ON AS I KNOW WHERE TO GET THEM!!!!!!!!

I DO NOT CUT or MAKE THESES MYSELF!!!!!!!!!

[This message has been edited by salsa-king (edited 26 May 2001).]