Top man - would you add that to the FAQ?

Ta,
Nick.

wot FAQ!!!!

it will be going up on my website in more detail soon

Phil G
WCSR

Looks exactly the same as the sti7 door interior that I already put in the faq Nick !!

Iain

... Yes, and the same cr@ppy speakers :D

This faq!

In fact, Iain did this superb section. My apologies, I thought the 8 might be different Iain!

Cheers,
Nick.

No worries :D It might be worth mentioning in the faq somewhere that they are the same...

I am in the process of fitting some component speakers to the front doors of my STi8,
It is pretty straight forward to get the door card off, i thought i would show you some piccys of what to do.

http://upload.turbosport.co.uk/getpi...2343936419.jpg
Undo the screw in the door handle

http://upload.turbosport.co.uk/getpi...2343978193.jpg
Lift out the plastic thingy with all the window controls on and remove the larger screw on the top

http://upload.turbosport.co.uk/getpi...3440314107.jpg
Pull off the handle surround, taking care not to marke the trim.

http://upload.turbosport.co.uk/getpi...3440771633.jpg
gently remove the plastic corner thingy by the wing mirror

http://upload.turbosport.co.uk/getpi...3440212104.jpg
pull on the door card at the bottom of the door to undo the clips and lift off the door card to reveal the speakers

http://upload.turbosport.co.uk/getpi...3440847616.jpg
Main speaker

http://upload.turbosport.co.uk/getpi...3440239283.jpg
Tweeter.

Now once i had done this, it revealed a differnet set-up to the MY01-02 setup where you can modify the main speaker mounting bracket to fit the after market speaker. BUGGER!!!
Off to B&Q to get some MDF,
I will post later to let you know how i get on

Phil G
WCSR


[Edited by philgr - 3/7/2003 12:47:05 PM]