ScoobyNet.com - Subaru Enthusiast Forum

ScoobyNet.com - Subaru Enthusiast Forum (https://www.scoobynet.com/)
-   General Technical (https://www.scoobynet.com/general-technical-10/)
-   -   What size are my injectors?!?!?!? (https://www.scoobynet.com/general-technical-10/174148-what-size-are-my-injectors.html)

dominicm 04 February 2003 03:44 PM

I am trying to find out the size of the fuel injectors on my MY95 WRX STI RA. I am fitting a Walbro uprated fuel pump and I might change the injectors if they are less that 400cc!!!

Can I tell just by looking at them?

Cheers
Dom.

Bob Rawle 04 February 2003 05:51 PM

380cc

dominicm 05 February 2003 09:59 AM

Thanks Bob,

Can anyone reccommend were to get some larger ones, I guess 550cc are the ones to go for?!?!?!

Cheers
Dom.

ChristianR 05 February 2003 10:16 AM

Depends what mod's you are doing.

dominicm 05 February 2003 10:29 AM

I have a full decat. exhaust and a K&N induction kit at the moment, I am booked in to have a Link ECU fitted in about a month so I guess larger injectors would be advisable!!

I am also going to fit the uprated fuel pump before the link and there has been quite a few debates that with an uprated fuel pump larger injectors are a waste of time!!

Dom.

Kingsize K2 05 February 2003 09:36 PM

Very interested to hear comments on this thread as well as I am in a very similar situation...

Mind if I tag along :)

Bob Rawle 05 February 2003 10:50 PM

If you can get even 440cc ones (std Sti3/4 then they will make a big difference, 550's are probably the best choice though.

dominicm 06 February 2003 08:39 AM

I have been in contact with Mark at www.lateralperformance.co.uk
and he has advised me to go for the 550cc inj, uprated Fuel reg and the Walbro fuel pump!

Bob, I've been trying to see Branko, but we can't seem to find a suitable time! Do you agree with Mark, I want to have the best set up for when you Link my car in March!

Cheers
Dom.

Mad4it 06 February 2003 02:24 PM

I have a set of 440cc injectors for sale, from a V4 if interested.

Bob Rawle 06 February 2003 07:09 PM

As I mentioned above 550's would be the best choice.

myp1 06 February 2003 07:23 PM

what size are the p1 injectors are they 440s as well

FASTER MIKE!! 06 February 2003 07:36 PM

just to be a pain in the a$$ what size injectors are on a uk my97-98 car

cheers mike

Bob Rawle 06 February 2003 07:40 PM

P1 = 440
MY97-98 Uk = 380

dominicm 06 February 2003 08:18 PM

Bob,

I guess I really want to know if I should get the lot, injectors, fuel Reg and fuel pump! I don't want to waste money of stuff, but I do want to have the best setup for when my Link is Mapped!

Cheers
Dom.

Bob Rawle 06 February 2003 08:26 PM

Well the 380's really will pinch it tight so the answer is yes ...

FASTER MIKE!! 06 February 2003 09:14 PM

cheers bob

dominicm 07 February 2003 09:43 AM

Cheers Bob.

See you in March!

Dom.

dowser 02 May 2003 10:56 PM

...along with 'front-entry'ing your turbo :)

Richard

[Edited by dowser - 2/5/2003 10:58:14 PM]


All times are GMT +1. The time now is 12:43 PM.


© 2024 MH Sub I, LLC dba Internet Brands