HELP

installed xp pro yesterday
Took fekkin ages to find a driver that would work my bloody modem.
it works now but has a constant "skirl" the speaker does not switch off when connected.
Tried all the usual speaker volume etc, no joy.:rolleyes:

Modem is a conexant soft56 data fax voice speakerphone handset pci internal

Any ideas?

Cheers

Craig

[Edited by Craig Mac21 - 1/24/2003 7:30:29 AM]

Also

When i re load nero xp asks me to pick users allowed to burn?
However thee is no users in the pop up xp box?

HELP PLEASE

Craig

with nero and you are the only user of the computer just accept the default. If you have other users who use the computer and have their own profile within Users?accounts, you must add their names to the permissions in Nero. I think however you have set your PC up as the single user, therefore accept the default.

As to you modem...ni idea.

xp is a bast**d if your trying to runn software not meant for xp get new updates for everything to make it run better under this system,as far as the modem is get rid of it and put a new v90.2 in will only be about £10 and should work properly ;)

If your modem driver won't let you switch off the speaker, you can switch off the internal speaker on the modem using terminal emulation software and AT commands :)

Do a Google for "modem AT commands" and you should find what you are after.

This is the usual command:


Mn (Speaker Control)
M0 -- The speaker is always off.
M1 -- Enables the speakerduring call establishment, but off once the carrier is detected.
M2 -- The speaker is always on.
M3 -- Disables the speaker during the dialing period and receiving carrier, but on during answering.

Thanks guys

Mark the nero default is not available it asks to highlight the users ?
I am the only user and my name is not in the box???

Craig

DJ

Where do i find the commands in the set ups?

thanks

Craig

Ask Scoty m8.

Got ure mail but would need to have a butchers hook at it my top shelf.

Also what v of Nero r u running?

Cant remember exactly how to do it but if you go to modem properties and into settings there should be a box with nothing in it.
enter the value "m0" without the quotes and it should stop the noise.
Or does m0 stop the sound of the dial tone ? hmm if you do a search on the net you should be able to find the codes.

Andy

Oppps just read what DJ had posted :)

Tried all of the above still the same????

Dougster 5.5 nero

Craig

AGGGHHHHHHHH SQEALIN B**TARD

SOUNDS LIKE MY BRAKES

PLEASE HELP

Craig

m8,

i had the same problem, i tried everything including using the AT command set. i eventually got a 3.5 mm jackplug off an old set of walkman speakers and stuck it in the phones socket in the modem. cured the screechin noise. also the xp drivers for the conexant win modem allow it to operate (read sh1te) so i would recommend a trip to ModemHelp

hope this helps

cheers

big sinky