Anyone know the flow-rate for these:
Grey side-feed injectors marked 0R05 from a '97 Legacy GT.

Anyone?

So how as these injectors identified - colour or code-number?

Sounds a lot like they are only 380cc injectors. Some twin turbo Legacys have yellow 480cc injectors, these I think are lmited to the 280ps engines.

Paul

Thanks Paul.

So whats a reasonable hp limit on 380cc?

Edited to say I've found the answer @ http://www.scoobynet.co.uk/bbs/threa...=159121&Page=3
~5.5cc/hp => 276hp for 4.

[Edited by DuncanG - 1/14/2003 3:29:04 PM]

Depends on BSFC - ie how rich you run it. I'd say 300 BHP would probably max them out at standard fuel pressure. However, if you run then maxxed out you risk them failing, potentially in an unsafe manner. Probably much over 260 BHP and you would certainly want to know the IDC.

[Edited by john banks - 1/14/2003 3:35:05 PM]