Just started a new build PC project and am interested in getting a windowed case with a UV black-light inside for it (god knows why :rolleyes: ).
Does anybody have any experience of decent suppliers of these things? I really know f all about it but thought it might be a bit of a giggle. I'm not looking to overclock at the moment but I'd like a case that had the facility for extra fans if required in the future. Ta :) |
the light you need is a cold cathode! Maplin sell them again now :D
Not got round to doing it yet so dont really know much. SS |
How about something like this one?
http://www.badgerpackaging.com/worklog/HM_Final001.jpg http://www.badgerpackaging.com/worklog/HM_Final006.jpg http://www.badgerpackaging.com/worklog/HM_Final009.jpg "The tach is a 10,000 RPM Autometer. I had a custom interface built to drive the tach. It is currently on it's 3rd firmware revision and probably it's last as I am pretty happy with it now. It will represent the CPU load from 0 to 100 percent with each percent coresponding to 100 RPM on the tach. It works very slick, and the latest firmware revision makes the tach do a small slow bounce at idle." All from http://forums.2cpu.com/showthread.ph...threadid=30130 |
Nice.
John |
Sad git
try coolcasemods.co.uk i think Cutting the side out looks tricky i havnt tried that yet Si |
Drexel's into case modding, i started to get into it, but i cant afford it :(
|
Not quite the same as ChrisB's case, but this is something I put together recently.
http://www.p1woc.co.uk/images/comp/C01.jpg http://www.p1woc.co.uk/images/comp/C02.jpg http://www.p1woc.co.uk/images/comp/C03.jpg http://www.p1woc.co.uk/images/comp/C04.jpg Cheers, Rob P1 Web Owners Club www.P1woc.co.uk |
Nooo, noooooooooooooo
That's not my case! :eek: |
Yeah, right ;) :p
[Edited by DJ Dunk - 12/30/2002 10:59:41 AM] |
Geeks
|
How hard is it cutting panel out?
Jig saw?!?!?! |
Jig saw is one way, dremels are also pretty popular..
|
Personally I think that car case is awesome :)
|
Try http://www.kustompcs.co.uk
They can do pretty much anything you want in the bespoke case department. I've dealt with them, and they are a pleasure to do business with. Gary, |
This is what I currently swapping over to:
http://80.177.63.18:7883/phpbb/viewt...hp?p=3374#3374 Cheers, Nick :) |
Mr Footlong
Where you getting that aluminium case from & how much?? |
A lian-Li PC60 and PC65 case. I got tyhe PC65 case. You are looking at between £100-110 for either I think. At least where I got mine.
Cheers, Nick :) |
i've seen the PC60 for £80inc recently, i'll dig the link out....
|
Aria selling Thermaltake Xaser II 6000A+ for £102inc, PC60 for £81.08inc....£91 delivered
http://www.aria.co.uk/ProductsList.a...ch&Category=10 Dom |
If you're looking at cases that can take extra fans, then go for the large thermaltake or antec cases (the top antec cases come with a truepower PSU thrown in)
http://www.antec-inc.com/pro_en_perfPlusAmg.html |
Rob, that a dual monitor output rig?
And why oh why the cream drives hidden inside :P How do you find the ThermalTake drive swappers? Good for cooling also? |
All times are GMT +1. The time now is 05:06 AM. |
© 2024 MH Sub I, LLC dba Internet Brands