Got back last night from a good trip down to Godspeed in Bridgend to have my 335 kit fitted.
Godspeed operate from a small unit on an industrial estate on the edge of Bridgend and Ian and Rich are top blokes. After a good chat and a cuppa they got to work and presented me with the two huge dinnerplates that are my new front brakes... blimey theyre huge! Fitting as always is pretty simple when done by professionals and this was no exception, Its quite time consuming what with splitting calipers etc punctuated by cups of tea, good banter and the local lads popping by - making for a good few hours. I had the Dot 5.1 fluid and the braided hoses at the same time and even when bleeding I could tell my brakes were feeling much better. After a short road test and a trip to the local tyre place (where they all came out of the lunch room to look at the huge brakes!) to shift my wheel weights I was on my way. So far I havent been able to use the brakes in anger yet as im still bedding them in but the inital bite and instant stoppping of even slight applications of the pedal make me think this is gonna be a great setup. I heartily recomend a trip down to have these units fitted by Godspeed as they really know what they are doing and absolutely want the kits to be right for each person. If youre reading this Ian - Cheers mate. Jon. PS. Ive no tie up with Godspeed etc just a satisified customer. |
Jon , Many thanks for those kind words , it's very satisfying when someone appreciates all the hard work we put in to making and fitting the kits , Cheers Ian
|
Excellent brakes :) We got the 308's so they'd fit under the 16's too....
http://upload.turbosport.co.uk/getpi...2631853222.jpg Comment from my husband last night "do you have to test the brakes on every corner, you're making me feel sick!" ;):D:cool: Thanks Ian :D Btw, also problem solved, nice and quiet now :) Jen |
Missing wheel nut alert! :D When did you take this photo?
|
Yeah - and keep it quiet dear - you didn't notice either! :D
For everyone else - it was replaced with another groovy locking wheel nut this morning! :) Jen |
JonW
I can hardly wait. We're booked in for the full Godspeed treatment on Monday. Front kit from the group buy and rears at the same time too. What was the problem with the wheel weights, is this something I need to consider for mondays trip?? RobP |
The wheel weights can foul on the caliper (335mm kit) if they are on the outer edge behind the spokes. If they're positioned on the rim away from the spokes they should be OK:)
Enjoy:D Iain. *EDIT* So it makes sense!! [Edited by Dyney - 8/22/2002 1:43:22 PM] |
Thanks
Off to check mine now......... RobP |
I just got the angle grinder out and removed the offending bit of caliper (very small amount and safe as the fluid path is nowhere near this part of the caliper). as my balancing people could'nt get a nice balance if they moved the weights inwards, this was on OZ P1 wheels.
ray t |
Another happy customer here!
http://upload.turbosport.co.uk/galle...5324712322.jpg Steve [Edited by Steve Sherwen - 8/22/2002 9:35:00 PM] |
Another satisfied customer here - very effective, and they look pretty cool as well............
http://upload.turbosport.co.uk/getpi...4817489574.jpg http://upload.turbosport.co.uk/getpi...4818385810.JPG |
Ray, do you have a before and after pic of where you ground off the caliper as I cant get a good balance on my wheels at the mo...?
Still bedding the brakes but they are very very strong! :-) |
Another thumbs up from me
Got them fitted yesterday and am well pleased. Ian does a great job and the trip was certainly worthwhile. 380 miles round trip!!! Thanks again Ian Rob & Hazel |
is there a website for godspeed?
|
|
What sort of price for this disc conversion?
And what do you get for your money? My oem disc's are fcuked so I'm wanting to upgrade ASAP RoadyT ('02 WRX) |
Have left a phone message on the answer machine and a message on here as I was thinking of changing the brakes and wanted to see what GodSpeed could offer but they never got back to me :(
|
UXG , If you have left a message I will phone you tomorrow morning , I have quite a few people to phone with details on my kits with you being one of them , Cheers Ian
|
Ian,
How long does it take from receiving an order to delivery of the 335 kit? Stefan |
Stefan , yhm , Ian
|
Ian,
As you promised my kit turned up yesterday, fitted this morning, no problems whatsoever (despite me thinking several times 'thats not going to fit in there!). Initial impression are that the pedal feels really solid and that much less pressure is need to stop the car than before. Andrew... |
2 thumbs up for me, bedded them in for 500 miles, now they have awesome stopping power(4 pot 335 kit), a very big thanks to Ian :D:D
Satisfied customer Steve |
Andrew , Most first reactions to the 335mm discs are F**k me they arn't going to fit in there !! But they do ... Wait till you have bedded them in and see how well they work then .
Steve , You are very welcome mate , UXG , Was you one of the people I called yesterday , I had 2 people leave there numbers but I can't work out what they are saying , If you are one of them either call me back or email me . Many thanks All Ian |
ozzy it takes ages i had to wait about 8 weeks for mine looks good and now i've changed the pads stops even better.
|
with the 325 kit do you need new calipers, some of the pics seem to show the OEM 4 pots? Anyone willing to email me how much they paid and for what? Also where is Godspeed located in case I need fitting? The web site doesn't give an address.
Piers LoFi |
LoFi , The kit to use with the standard Subaru 4 pot calipers is our 335mm kit , The complete kit is £575 plus £10 delivery , or we can fit it for you and we are based in Bridgend , South Wales , Hope this helps , Ian
|
Ian, thanks for the reply. Does the kit include uprated brake hoses? If not, how much r they and how much do you charge for fitting?
Piers LoFi (email me as per profile if you'd prefer) |
LoFi , The braided hose kits are £60 and fitting the 335mm kit is £95 which includeds Dot 5:1 fluid .
If I put the prices on here then others can see them . Cheers Ian |
Ian, sorry to but in on here, but can you get me any pads or should i source my own?
I want to get these new discs tried ASAP. you can reply to my e-mail if you like Cheers Davy |
All times are GMT +1. The time now is 01:00 AM. |
© 2024 MH Sub I, LLC dba Internet Brands