ScoobyNet.com - Subaru Enthusiast Forum

ScoobyNet.com - Subaru Enthusiast Forum (https://www.scoobynet.com/)
-   Dealer and Third Party Supplier Queries (https://www.scoobynet.com/dealer-and-third-party-supplier-queries-3/)
-   -   Tracking In Hertfordshire (https://www.scoobynet.com/dealer-and-third-party-supplier-queries-3/115931-tracking-in-hertfordshire.html)

jimi 24 July 2002 01:12 AM

Hi all

Could anyone tell me where i can take my sti to get the geometrical setting done i need the tracking to be set as well as all the other bits that go with it.

TIA

JIM

MATTeL 25 July 2002 10:56 AM

Jimi,

I would recommend you bite the bullet and head up to Keyworth (near Nottingham), the TSL geometery set-up is fantastic.

Accuracy to a minute on the camber and the 0.1mm on the toe!:eek:

There is a fixed price for doing the work no mater how long it takes as well.

I know Rum has taken his Sti up there and there are plenty of other owners that trust the settings.

The only downside is that a simple visit might cost you a little more than you expect. ;)

Mark

PaulMc 25 July 2002 12:07 PM

Or you could try Powerstation's bumpsteer mod and alignment. :D. I live in Herts and trekked cross country to them one morning. Not too far.

jimi 25 July 2002 01:06 PM

Thanks a lot for your help guys i need to take it somewhere where they know what there are doing.The outer edges are wearing and when i corner at fast speed the tyres squrll like hell so there is some thing wrong somewhere.

JIM:D

adamm 25 July 2002 01:33 PM

ditto - go to TSL - nice run up as long as you can find the place, I'm going to get mine done asap up there...

jimi 25 July 2002 02:38 PM

adamm

If you would like we could go up there in convoy should you fancy i have still not spoken to paul yet to book it in but i will keep you posted.

JIM

MATTeL 25 July 2002 05:53 PM

Jimi,

TSL seriously know what they are doing the camber on my car is within 1 minute of eah other and the toe is within a few posints of a mm!!

They have the proper set-up specifications from SUbaru to do the work and some of the most accurate measuring equipment, as you might have noticed from being able to do a minute (1/60th of a degree (I think))!

Also free coffee, comfy seating area, a workshop that looks like a surgary!

If I didn't think they were up to the job I would never recommend them!

Mark

jimi 25 July 2002 06:12 PM

Nice one mark looks like i will go to them to get the work done.

JIM

MATTeL 26 July 2002 12:53 PM

Just remember to say "No" to Paul! ;)

I went up there once to look around and then found my car getting bits put on it with alarming speed and regularity! ;)

Maybe I just like the tea (if Paul ever manages to remember to make it!)!:D

jimi 26 July 2002 05:49 PM

if they make us cups of tea what do they put in it when were not looking?

I think i will make my own tea.

JIM

adamm 26 July 2002 07:50 PM

Hey Jimi - sure thing if you wan't to go up I am probably going up the week beginning 5th Aug.

Only problem with TSL is there are just too many goodies laying around that seem to stick to you car as you leave with a slightly lighter wallet.. :D


All times are GMT +1. The time now is 07:54 AM.


© 2024 MH Sub I, LLC dba Internet Brands