ScoobyNet.com - Subaru Enthusiast Forum

ScoobyNet.com - Subaru Enthusiast Forum (https://www.scoobynet.com/)

- Drivetrain (https://www.scoobynet.com/drivetrain-11/)

- - Fitting Lambda Sensor (https://www.scoobynet.com/drivetrain-11/111939-fitting-lambda-sensor.html)

Shimster

10 July 2002 10:36 AM

Anyone with any helpful hints for fititng the a new Lambda Sensor?
I have heard they can seeze and the thread can strip :-(, not geeod when it cost £220!
Thanks in advance
Alex

STi wanna Subaru

10 July 2002 11:10 AM

Make sure the engine is cold! Remove the intercooler, spray some releasing oil on the thread..........leave for a bit.....remove lambda. 22mm spanner required

PG	07 October 2002 11:10 AM

get a universal 3 wire jobbie from Halfords or the like. I was £35 for mine. saves the risk of fudging up the original.(that is if you are wanting another for a de-cat??)
just a thought.

Paul

[Edited by PG - 7/10/2002 11:11:53 AM]

All times are GMT +1. The time now is 05:56 AM.