Prodrive Springs for Hawkeye WRX
 

Hi, I have a Hawkeye wrx with the prodrive performance pack but for whatever reason someone who owned if before me has put the standard springs back on it.

Is there anywhere I can get the prodrive springs or similar springs that will go with the standard shocks?

The car just looks too high. Especially at the front arches.

https://cimg0.ibsrv.net/gimg/www.sco...6e6aa3ff31.jpg

the spring set was never part of the std PPP which was basically just an ECU retune, but an option for people to add on........

I never knew that. Thanks for telling me

@2pot should be able to help you.

WA/A2+A3 springs £325

The optional Prodrive lowering springs, for inverted dampers, came with different bump stops, that allowed for the additional lowering - the bump stops are internal on the inverted dampers.
Do you have inverted or non-inverted dampers?

Inverted dampers on the front. Rear is KYB Excel G

My springs are STi spring rate.
The rear WRX excel-g would be under-damped for an sti-rate spring.
At the rear, you'd need ultra sr inverted (321004/321005), ultra sr non-inverted (324030/324031), AGX or Tein Enduropro plus.
Otherwise, you'll need wrx rate springs.