Whats the best oil, coolant and plugs etc on a forged engine ?
I guess people will have different opinions, what's the best servicing items like oil, coolant and plugs etc to use on a UK 2.5 engine that's been forged and is currently running 437bhp and has covered just over 3k since it was forged. The previous owner gave me a 1 lire bottle of what oil is currently in it which is SilverLine 10W-50 which is what East Kent Subaru apparently use on all their engines which is where the car was looked after.
|
I’ve got forge 2.5 running 433bhp using
K&N HP1010 oil filter Fuchs Titan Race Pro S 10W-50 oil NGK ILFR7H plugs Coma Xstream G30 coolant |
Motul 300v, chrono
https://cimg2.ibsrv.net/gimg/www.sco...49ae2c221b.jpg |
AS recommended me 10w50 on a forged 2.1 and sold me the motul, I don't doubt their expertise. Always used comma g30 for coolant, used some expensive blue stuff from opie once but didn't see any difference in temp and comma is like half the price
|
morris oils 100 years old British based company
engine oil 10w50 £86 15l i used motul 10w40 , millers nt+ 10w50 moved to morris heard only good things about it and is cheap from link below https://www.ebay.co.uk/itm/MORRIS-10...8aAiiAEALw_wcB https://cimg4.ibsrv.net/gimg/www.sco...9c83ac786d.jpg |
I’ve been running fuchs pro r or pro s for the duration of my engines life, ngk plugs and halfords pink coolant, recently added some water wetter but can’t say I’ve noticed any obvious differences.
|
it’s a bit of a what’s the best oil debate , very simply don’t buy cheap , and use known branded parts , and it will be fine , i’m more inclined towards a 10/40 but have used 10/50 300v oil , i now use millers cfs nano dive , it’s better priced and have had no issues with it , a quality long life coolant even euro car parts stock decent stuff , and again quality platinum tipped plugs
|
Originally Posted by Vxr2010
(Post 12112791)
it’s a bit of a what’s the best oil debate , very simply don’t buy cheap , and use known branded parts , and it will be fine , i’m more inclined towards a 10/40 but have used 10/50 300v oil , i now use millers cfs nano dive , it’s better priced and have had no issues with it , a quality long life coolant even euro car parts stock decent stuff , and again quality platinum tipped plugs
there is some issue with millers nt+ to ,silkolene recycled oil and list goes on |
I've always used this in my forged 2.5
Millers Oils CFS 10w-60 Competition Fully Synthetic Engine Oil Changed every 3,500 to 4,500 miles. |
The late, great Harvey Smith used Royal Purple oil.
That's what's in my forged 98 car. |
and RP is available from the same guys that supply the "trick" up-pipes.............as well as other quality options ;)
|
I had my car mapped by Bob last week, for my engine he recommended Fuchs Titan Race Pro S 10W-50 Ester Fully Synthetic, and for plugs NGK ILFR7H, that's what i'll be going with.
|
I've used Fuchs titan Pro 10-50 and Ravenol 5-50. The Ravenol was recommended by Andy Williams and when I did some research on it, it seems to be a really good oil. You can buy it direct from them and they also do a blue light discount which is a bonus for me as my wife has one. :)
You may want to check out this recent post on another forum. There is a significant amount of information on oil choice in the later half of the thread (forget about the first few pages) https://www.type-ra.com/subaru-forum...-spec-c.35198/ |
Fuchs whilst I'm sure reasonable would be near the end of any list of recommendations...........
|
Originally Posted by stockcar
(Post 12113164)
Fuchs whilst I'm sure reasonable would be near the end of any list of recommendations...........
|
Originally Posted by adam.pah
(Post 12113160)
You may want to check out this recent post on another forum. There is a significant amount of information on oil choice in the later half of the thread (forget about the first few pages) https://www.type-ra.com/subaru-forum...-spec-c.35198/
|
Originally Posted by The Joshua Tree
(Post 12113187)
That's deffo an interesting debate lol, i'm only half way through and its got a bit heated. You've obviously read the whole thread Adam, what was the consensus with the oil, i.e what viscosity to use and what brand etc ........ I'm upto the bit where someone suggested 10W 60, ive deffo not heard that suggested before.
|
All times are GMT +1. The time now is 06:20 PM. |
© 2024 MH Sub I, LLC dba Internet Brands