WRX STI Spec D
 

Here we go bought summer 2016 with a 30 day warranty, on the 31st day the HG went 🤦🏻‍♂️

Went straight to TDR for a forged rebuild and map.

https://cimg4.ibsrv.net/gimg/www.sco...92cc7e7ac.jpeg
As it now sits, brakes to be bled, alignment then ready for MOT
https://cimg7.ibsrv.net/gimg/www.sco...aa353d75f.jpeg
Rear subframe powder coated
https://cimg9.ibsrv.net/gimg/www.sco...0750ca520.jpeg
Diff mount powder coated and polybushed
https://cimg1.ibsrv.net/gimg/www.sco...c51cbe3e7.jpeg
Diff mount test fit
https://cimg3.ibsrv.net/gimg/www.sco...e7c66d6a2.jpeg
White line arms test fit
https://cimg5.ibsrv.net/gimg/www.sco...8f0f75815.jpeg
SWRD bushes fitted
https://cimg6.ibsrv.net/gimg/www.sco...59ecd2cc9.jpeg
Diff cradle powdercoated
https://cimg7.ibsrv.net/gimg/www.sco...2bbf71347.jpeg
And polybushed
https://cimg9.ibsrv.net/gimg/www.sco...244ced403.jpeg
Cradle fitted
https://cimg2.ibsrv.net/gimg/www.sco...4b8524f0f.jpeg
Swave and summit forged alloy diff cradle supports
https://cimg3.ibsrv.net/gimg/www.sco...efef54757.jpeg
Swave and summit subframe lock kit
https://cimg5.ibsrv.net/gimg/www.sco...52e8abefe.jpeg
Diff rebuilt looking pretty with Swave and summit extra capacity cover
https://cimg2.ibsrv.net/gimg/www.sco...a5a8baddb.jpeg
Rear hubs powdercoated, new bearings, new dust sheilds and polybushed
https://cimg5.ibsrv.net/gimg/www.sco...9d9632250.jpeg
Subframe, diff, x stiff ARB, white line mounts and hubs fitted
https://cimg1.ibsrv.net/gimg/www.sco...f63c592a2.jpeg
First alignment with rear done
https://cimg5.ibsrv.net/gimg/www.sco...922d79a45.jpeg
https://cimg5.ibsrv.net/gimg/www.sco...7df38f2f1.jpeg
https://cimg3.ibsrv.net/gimg/www.sco...5f45bc301.jpeg
To the front 😂 Lower control arms powdercoated and bushed
https://cimg5.ibsrv.net/gimg/www.sco...f632d9bd7.jpeg
Hubs powdercoated, new bearings and whiteline bump stop
https://cimg8.ibsrv.net/gimg/www.sco...61753e92f.jpeg
Extended wheel studs
https://cimg3.ibsrv.net/gimg/www.sco...4444d7986.jpeg
Whiteline Anti lift kit
https://cimg7.ibsrv.net/gimg/www.sco...ef3d183d4.jpeg
Front suspension refitted
https://cimg0.ibsrv.net/gimg/www.sco...87f70c419.jpeg
Swave and summit 5 piece subframe replacement
https://cimg1.ibsrv.net/gimg/www.sco...cb502bda1.jpeg
Height dialled in 18s with no rubbing at this height
https://cimg2.ibsrv.net/gimg/www.sco...6b85c7fd8.jpeg
Engine bay needs a tidy up, can anyone recommend a pod filter the mishimoto one imploded on first start up 🤦🏻‍♂️

Looks good there mate.

I'd say K&N, been using it on my classic

I am using a k&n with my mishimoto front mount. If you look 0nline at the k&n catalogue it gives all the dimensions of all their filters so you find one that matches available space and maf pipe diameter etc.
https://cimg1.ibsrv.net/gimg/www.sco...d4c44a73f4.jpg