Impreza hawkeye Sti jdm restrictor pill size
Hi all I have ******d up I was cleaning my boost system and dropped the restrictor pill god knows where its gone, just been looking at import car parts and it says should be 1.1mm, is this correct my cars a hawkeye sti jdm model 2.0 ej207,
Any help would be much appreciated |
Originally Posted by Denton000
(Post 12068704)
Hi all I have ******d up I was cleaning my boost system and dropped the restrictor pill god knows where its gone, just been looking at import car parts and it says should be 1.1mm, is this correct my cars a hawkeye sti jdm model 2.0 ej207,
Any help would be much appreciated Am I correct in thinking the Restrictor pill is located where the yellow dot is, the part I have lost is the end part that's circled , is that just a fitting so it connects to the rest of the boost circuit? |
Yes your right its just a straight connector a piece of 4mm silicone hose and extend it or if stuck check washers there's usually one you can steal temporarily there.
Pill is where the yellow dot is goes to the turbo side. |
Originally Posted by 1509joe
(Post 12068715)
Yes your right its just a straight connector a piece of 4mm silicone hose and extend it or if stuck check washers there's usually one you can steal temporarily there.
Pill is where the yellow dot is goes to the turbo side. |
Silly question....
what does this exactly do? ive got a blob jdm and I’m in the mids of changing all the vac lines |
Slows the pressure down so that the 2 port boost solenoid can control the boost pressure. If Subaru hadn't been penny pinching the 3 port was a far better system.
|
All times are GMT +1. The time now is 06:36 PM. |
© 2024 MH Sub I, LLC dba Internet Brands