LED projector upgrade 2004 blobeye
 

Hi, I found the beam pattern from the headlights on the blobeye really bad so I bit the bullet and bought projectors and novsight LEDs (low beam only) to go inside the OEM housing, I fitted the projector and installed the led but when I turn the full beam on the low beam turns off and the full beam doesnt turn on, is there anyway to get around this? Also to get the cut off line in the projector to go down when I hit the full beam can I just tap into the full beam positive and negative? Thanks in advance

Just replied to your Facebook post on subaru owners UK but I'll post it here too:

You need a wiring harness for the ballasts, 6 quid on ebay or 35+ if you buy one from someehere like retrofitlab, people will tell you there's a difference and you should get the more expensive one, they are exactly the same and the quality is the same in every way