recieved and fitted cheers
|
Originally Posted by rockabilly
(Post 12056077)
recieved and fitted cheers
|
All received thankyou
|
Originally Posted by Dwoo1056
(Post 12056079)
All received thankyou
|
Received mate! Thanks!
|
Originally Posted by Wrx sti Ed
(Post 12056127)
Received mate! Thanks!
|
Received and fitted 👍
thanks again 👌 |
Originally Posted by adam.pah
(Post 12056202)
Received and fitted 👍
thanks again 👌 Cheers Adam get some pics up when you can :) |
Originally Posted by crazyspeedfreakz
(Post 12056210)
Cheers Adam get some pics up when you can :)
https://cimg8.ibsrv.net/gimg/www.sco...00ddb9172.jpeg https://cimg2.ibsrv.net/gimg/www.sco...8b323411f.jpeg https://cimg4.ibsrv.net/gimg/www.sco...27b253994.jpeg |
Look good there adam, what power are you running there on you blob
|
Bump still waiting on confirmation for the final 3
or 4 people will start pming those I have not heard from tomorrow :) |
Originally Posted by crazyspeedfreakz
(Post 12056414)
Look good there adam, what power are you running there on you blob
|
Bonnet struts
https://cimg8.ibsrv.net/gimg/www.sco...55b3c277e6.jpg
https://cimg0.ibsrv.net/gimg/www.sco...338907c6a3.jpg https://cimg4.ibsrv.net/gimg/www.sco...7a19e09285.jpg fitted no probs but managed to lose 1of the retaining clips lol,any1 got any spares or know where i can get1? |
Hi bud looking good there.... yes them clips are quite difficult there’s abit of a technique to it but
can get dropped pretty easy... i personally don’t have any spares as they stopped giving them out but,,,, there is a place in the Uk that sells the ball joint ends with a set of clips I found off eBay I haven’t used them so you would have to give it ago I think they should be fine though. https://www.ebay.co.uk/itm/Gas-Strut...8AAOSwgW9cdtjd :) |
Originally Posted by adam.pah
(Post 12056422)
Current running around 420 but have supporting mods for 500. It’s in the standard internals so don’t want to push it any harder. Have just bought a forged 2.1 cdb engine though so power will be going up closer to 470+ish once it is all fitted. Then I’ll be looking at selling the current engine and turbo. The car has only done 42k miles so the current engine is still very strong.
jdm ?? My spec c is running 403 could push it abit more but still on tmic don’t really wanna go fmic and happy with the power levels for the time been what turbo are you currently running to achieve that.... I’ve fitted a lm420 which is a great turbo maybe go for something bigger if I was tracking the old girl but just road use :) |
Originally Posted by crazyspeedfreakz
(Post 12056470)
jdm ?? My spec c is running 403 could push it abit more but still on tmic
don’t really wanna go fmic and happy with the power levels for the time been what turbo are you currently running to achieve that.... I’ve fitted a lm420 which is a great turbo maybe go for something bigger if I was tracking the old girl but just road use :) When I put the new engine in I will be swapping for an MD321T that has some nice little upgrades from Lateral. It should spool up much faster than the S/R 40. I'm not really chasing numbers, just want a fast road car. So the 2.1 should provide the extra torque and with the turbo spooling up much quicker it should have good mid-range, I may even need to turn the power down a bit! lol! If you wanted more power, I think it is possible on an uprated top mount with the right setup; although I am no expert. I've heard good things about the LM turbos, more power with hardly any lag. I've never liked pushing the engine to the limiter, so that's why I wanted the faster spool up of the MD. |
Bonnet struts
Cheers for the link mate just ordered some,ahl try not to lose these ones:lol1:
|
I never did fit mine to my hawk before selling it but wondering if they would work on a levorg? Same front end as a 2018 wrx I belive.
I plan to have a carbon bonnet fitted at a later date, do you think they would be too stiff for the carbon? Thanks |
On my MY11 WRXSTI saloon (steel bonnet) I had to change the bonnet struts for the Spec C versions (alloy bonnet) when I fitted the seibon CF bonnet.
The originals were far toooo strong |
I need some of these.
|
All times are GMT +1. The time now is 05:41 PM. |
© 2024 MH Sub I, LLC dba Internet Brands