Does the STI boot spoiler use the existing WRX spoiler holes on a newage?
Out of interest, as per title. Considering whether to put an STI wing on my WRX. Wondered if I need to have a boot lid modified, or if a genuine STI wing will bolt straight onto existing lid without redrilling etc?
|
Originally Posted by Ste333
(Post 12044688)
Out of interest, as per title. Considering whether to put an STI wing on my WRX. Wondered if I need to have a boot lid modified, or if a genuine STI wing will bolt straight onto existing lid without redrilling etc?
would be better to find a bootlid complete with spoiler in your colour, ask a few breakers |
Originally Posted by Ste333
(Post 12044688)
Out of interest, as per title. Considering whether to put an STI wing on my WRX. Wondered if I need to have a boot lid modified, or if a genuine STI wing will bolt straight onto existing lid without redrilling etc?
take shrekstas advice best bet around £300ish posted |
It uses the existing 4 holes plus you need to drill another 8
|
Originally Posted by the shreksta
(Post 12044720)
i think its different holes, also make sure you use some rubber washers around the bolts or your boot will get a tad damp.
would be better to find a bootlid complete with spoiler in your colour, ask a few breakers
Originally Posted by ZANY
(Post 12044725)
no I’ll not fit take shrekstas advice best bet around £300ish posted
Originally Posted by Russell38
(Post 12044731)
It uses the existing 4 holes plus you need to drill another 8
|
Originally Posted by Russell38
(Post 12044731)
It uses the existing 4 holes plus you need to drill another 8
I used the 4 existing holes that did match up, drilled the other ones that are under the WRX spoiler footprint in my WRX bootlid so that if required I could go back to the WRX spoiler, which I did when I sold the car. I held my STI spoiler down with sections of very strong double sided padded sticky tape in the middle and the 6 mounting bolts. It was rock solid, no issues at all. |
Hi, bumping this thread since i have a similar question.
I own a 2000 GC8 Impreza GT and have a STI wing that I want to use, I did however not recieve the extra bolts for the STI wing so im stuck with my 4 original bolts on the GT wing. Are the additional 8 bolts the exact same bolts as those 4 in use currently? The dealers in my area cannot for some reason find out what bolts are used on the STI wing (probably cause it was never sold in the rest of Europe) so they cant even order them for me :/ |
4 bolts then bond it in the middle with pu sealer
|
Thanks, but I rather bolt it properly :P
|
it wont come off
|
Just for completeness.........and assuming this is the type of spoiler we are talking about ;)
https://jp-carparts.com/images/subar...mage_921_6.gif Ref 96081A above - "Slider bolt, Spoiler" part number 96055FA280 Qty:10 off Ref N370016 above - "Flange nut" part number 902370016 Qty: 10 off or have you a 22B version?? http://jp-carparts.com/images/subaru...mage_921_5.gif |
Spoiler gayers
|
Thanks alot Don Clark! It is normal STI wing so the first image should do the trick! :)
Definitely gonna browse jp-carparts.com, seems like a good site! |
What's the difference between the STI spoiler fitment and 22B would have thought been the same Doh?
Originally Posted by Don Clark
(Post 12047541)
Just for completeness.........and assuming this is the type of spoiler we are talking about ;)
https://jp-carparts.com/images/subar...mage_921_6.gif Ref 96081A above - "Slider bolt, Spoiler" part number 96055FA280 Qty:10 off Ref N370016 above - "Flange nut" part number 902370016 Qty: 10 off or have you a 22B version?? http://jp-carparts.com/images/subaru...mage_921_5.gif |
All times are GMT +1. The time now is 11:58 AM. |
© 2024 MH Sub I, LLC dba Internet Brands