Anyone replaced Inner tie rods ?
On a 1995 wrx, attempting my Inner steering rack tie rods ( not the outer one on the hub lol ) at the weekend, seems an easy enough job, but thought id ask as usual if anything to know about before doing the job
replacement ones have a square edge so an adjustable can be used to tighten them up, not sure if originals can be removed this way chhers |
|
Originally Posted by Don Clark
(Post 12041448)
Maybe of use...
https://ministrant-sponge.000webhost...%20removal.jpg https://ministrant-sponge.000webhost...%20install.jpg cheers bud looks very informative , What year was that aimed at ? I don't have a special tool it mentions so hopefully can cobble something lol |
Also I don't think my replacements are side specific they look identical |
Originally Posted by The Rig
(Post 12041530)
cheers bud looks very informative , What year was that aimed at ? I don't have a special tool it mentions so hopefully can cobble something lol Update Looking at part numbers they were originally different for early models, but now the same (34140AA030) |
I changed mine a couple of years ago (on a 96 UK turbo wagon). If I remember rightly, at some point during the job I had to resort to using a specialist bike tool to get one of the old rods loose or tighten up one of the new ones. I'll check in the garage later, but most likely a 30mm or 32mm open-head flat spanner (much slimmer than a typical adjustable).
|
Ok cheers Don for the technical update and cheers mark for the heads up, im tackling the job in a minute so fingers crossed
cheers |
Am I being daft ? new ones have a lock washer but it's different to what's on there , can't work out how new one locks ? https://cimg9.ibsrv.net/gimg/www.sco...0679830236.jpg https://cimg0.ibsrv.net/gimg/www.sco...b94d61965e.jpg |
I would imagine the pegs on the thread side of the washer go in the same holes as the old washer to stop it rotating, and then you bend the washer outwards against one of the hexagon flats to stop it coming loose.
|
Yep spot on bud I worked it out wen I took old one off , I couldn't see the 2 slots in the actual steering rack the tangs lock into , was only visible once old one was removed . All done now , now for tracking to be done cheers for help |
All times are GMT +1. The time now is 02:24 AM. |
© 2024 MH Sub I, LLC dba Internet Brands