|
Considering Selling Up 450+bhp Blobeye, 340bhp Bugeye, 2.1 Stroker Parts too
Considering selling up as I've been looking at houses recently,
I have owned my 2003 Blobeye for over 4 years it's now running over 450bhp with a decent spec on the Ethanol map @ 69k miles ( SC42 tinkered by Owen Developments ran 12.3 & 120.5mph with a crap 1.8 60ft.) 10k ? I have owned my 2002 Black Prodrive Bugeye Sti for almost a year now too that closer to 130k miles tho (stock car with a map & arch rust but relatively clean everywhere else) 5.5k ? I also have almost all the parts for a 2.1 stroker other than oil pump, head gasket & 14mm headbolts (RCM Pistons, Manley Rods & JDM Inlet all new gaskets bolts etc) Offers ? As well as the old knocking Semi-Closed, AVCS Heads engine from the Bugeye which was knocking @ 119k but has never been opened, ( Long Engine on a pallet ) Offers ? Would anyone be interested in any of the above ? Specs for both cars will be on my thread, https://www.scoobynet.com/members-ga...fs-scooby.html Location is in Glasgow |
Also a spare set of Newage Sti Alloys in Black pretty clean with NS2-R Track tyres good for another summer id reckon :)
|
https://www.scoobynet.com/subaru-par...d-goodies.html
Link to the 2.1 stroker parts i bought from off here :) V7 sti block which has had the following work done at rcm Premium deep block case clense 14mm wrc stud conversion Block face skim Rebore and plateau hone cylinders Rcm block case blanking kit V7 sti coltec stage 2 single avcs cylinder heads Rcm acid strip Head skim Drilled for 14 wrc head studs Heads are stripped down with all valves,springs,cams,cam pulleys and rocker covers Brand new rcm 2.1 omega 92.50 pistons Used 2.1 crank covered 1000 running in miles Used 2.1 manley con rods covered 1000 running in miles Brand new acl race rear thrust main bearing set Brand new acl race big end bearing set Brand new cylinder block rebuild kit Brand new rcm oil baffle plate kit Brand new rcm 2 piece billet gudgeon pin separator Bond liquid grey sump sealer Brand new genuine sump Brand new genuine oil pick up pipe Brand new genuine sump dipstick tube Brand new genuine oil cooler modine crossover pipe Brand new rcm race 70 deg water thermostat Brand new rcm quality water pump Brand new genuine water transfer crossover pipe o ring and bolt kit Brand new genuine camshaft oil seals Brand new supertech valve stem seals Brand new rcm billet timing belt guide Brand new genuine/rcm rocker cover gasket set Brand new rcm billet high temp half moon seals Brand new genuine rocker cover bolt set Brand new genuine timing belt cover bolt set Brand new rcm 14mm head dowels |
How much would you value the bug at? |
What ya doin selling both |
Originally Posted by ZANY
(Post 12040112)
How much would you value the bug at? just stuck 4 new Yokohama AD08R's all round & Carbon Lorraine rc5+ pads. anything close to what i paid would keep me happy will also have a fresh MOT on the Bugeye by end of this week |
Originally Posted by RAGGY DOO
(Post 12040139)
What ya doin selling both or possibly an aerial atom...... |
So what parts you got for the 2.1 set up from the list you linked to
|
Originally Posted by Neilxr
(Post 12040159)
So what parts you got for the 2.1 set up from the list you linked to
just the engine parts. V7 sti block which has had the following work done at rcm Premium deep block case clense 14mm wrc stud conversion Block face skim Rebore and plateau hone cylinders Rcm block case blanking kit V7 sti coltec stage 2 single avcs cylinder heads Rcm acid strip Head skim Drilled for 14 wrc head studs Heads are stripped down with all valves,springs,cams,cam pulleys and rocker covers Brand new rcm 2.1 omega 92.50 pistons Used 2.1 crank covered 1000 running in miles Used 2.1 manley con rods covered 1000 running in miles Brand new acl race rear thrust main bearing set Brand new acl race big end bearing set Brand new cylinder block rebuild kit Brand new rcm oil baffle plate kit Brand new rcm 2 piece billet gudgeon pin separator Bond liquid grey sump sealer Brand new genuine sump Brand new genuine oil pick up pipe Brand new genuine sump dipstick tube Brand new genuine oil cooler modine crossover pipe Brand new rcm race 70 deg water thermostat Brand new rcm quality water pump Brand new genuine water transfer crossover pipe o ring and bolt kit Brand new genuine camshaft oil seals Brand new supertech valve stem seals Brand new rcm billet timing belt guide Brand new genuine/rcm rocker cover gasket set Brand new rcm billet high temp half moon seals Brand new genuine rocker cover bolt set Brand new genuine timing belt cover bolt set Brand new rcm 14mm head dowels |
Willing to listen to serious offers on it all.
|
Location ? |
Originally Posted by Neilxr
(Post 12040185)
Location ? Can post too. |
Brand new rcm 2.1 omega 92.50 pistons
Used 2.1 crank covered 1000 running in miles Used 2.1 manley con rods covered 1000 running in miles Brand new acl race rear thrust main bearing set Brand new acl race big end bearing set Price for buying all 5 of the above items? Also - price for the STi7 engine which is knocking I will be happy to pick up from you whatever items I end up buying Thanks, Russell |
Originally Posted by WUZ
(Post 12040237)
Brand new rcm 2.1 omega 92.50 pistons
Used 2.1 crank covered 1000 running in miles Used 2.1 manley con rods covered 1000 running in miles Brand new acl race rear thrust main bearing set Brand new acl race big end bearing set Price for buying all 5 of the above items? Also - price for the STi7 engine which is knocking I will be happy to pick up from you whatever items I end up buying Thanks, Russell Happy to negotiate with anyone on any parts, but of course would rather they all went as a kit, |
Happy to split & listen to offers on whats below
V7 sti block which has had the following work done at rcm Premium deep block case clense 14mm wrc stud conversion Block face skim Rebore and plateau hone cylinders Rcm block case blanking kit V7 sti coltec stage 2 single avcs cylinder heads Rcm acid strip Head skim Drilled for 14 wrc head studs Heads are stripped down with all valves,springs,cams,cam pulleys and rocker covers Brand new rcm 2.1 omega 92.50 pistons Used 2.1 crank covered 1000 running in miles Used 2.1 manley con rods covered 1000 running in miles Brand new acl race rear thrust main bearing set Brand new acl race big end bearing set Brand new cylinder block rebuild kit Brand new rcm oil baffle plate kit Brand new rcm 2 piece billet gudgeon pin separator Bond liquid grey sump sealer Brand new genuine sump Brand new genuine oil pick up pipe Brand new genuine sump dipstick tube Brand new genuine oil cooler modine crossover pipe Brand new rcm race 70 deg water thermostat Brand new rcm quality water pump Brand new genuine water transfer crossover pipe o ring and bolt kit Brand new genuine camshaft oil seals Brand new supertech valve stem seals Brand new rcm billet timing belt guide Brand new genuine/rcm rocker cover gasket set Brand new rcm billet high temp half moon seals Brand new genuine rocker cover bolt set Brand new genuine timing belt cover bolt set Brand new rcm 14mm head dowels |
|
|
|
|
Willing to split if any interest in other parts, Head or freshly machined block on its own ?
|
https://cimg4.ibsrv.net/gimg/www.sco...36b5e031a3.jpg
4 x Sti Alloys 17" with Nangkang NS2-R Tyres Approx 3mm tread should see at least a summer or good track spares |
|
A house trumps any car tbh mate I’d sell up too if you got a chance to get on property ladder glwts |
Yep, sadly I've been there where I sold all my pride and joys many years back to get enough money for my first house deposit. I rolled around in a diesel escort estate to save money, it was lowered though with alloys so looked the balls. :)
Also I still had a modified RX7 under a car cover and a modified Rover 620ti toy all of which I eventually sold once in my new house. Sold all but my classic beetle. You have to make these sacrifices but it's all worth it in the end and it gets easier the longer you do it. |
Originally Posted by BrownPantsRacing
(Post 12040468)
Yep, sadly I've been there where I sold all my pride and joys many years back to get enough money for my first house deposit. I rolled around in a diesel escort estate to save money, it was lowered though with alloys so looked the balls. :)
Also I still had a modified RX7 under a car cover and a modified Rover 620ti toy all of which I eventually sold once in my new house. Sold all but my classic beetle. You have to make these sacrifices but it's all worth it in the end and it gets easier the longer you do it. It's not a certainty, I am tempted to put it off still while i have no real responsibilities sell it all and buy an Atom, Supercharged one would be the dream, although the new Atom 4 with the latest Civic Type R 2.0 Turbo has 2 year waiting list, If i survive i can always do the whole house thing later lolol |
The Blue/Black Prodrive Bugeye Sti got a new MOT yesterday,
I would be asking for £5,500 ono. I can't find another Sti for that price available right now, The arches let it down but the car is solid everywhere else, 4 fresh AD08R's, RC5+ Pads & Relatively new 2.75" Miltek Full De-Cat |
Hi mate you could get more than 5.5k breaking the bug ,people are selling wrx,s for that ,but depends on how quick you wanna sell it I guess 👍 |
Originally Posted by SmurfyBhoy
(Post 12040440)
|
Originally Posted by Sti nev
(Post 12040629)
Hi mate you could get more than 5.5k breaking the bug ,people are selling wrx,s for that ,but depends on how quick you wanna sell it I guess 👍 From what i could find there where very few Prodrive Bug in that colour. Still has certificate etc. |
Originally Posted by Classic Mexico
(Post 12040710)
Whats the price on the engine fella ?
Would u collect or need it posted ? |
| All times are GMT +1. The time now is 11:18 PM. |
© 2024 MH Sub I, LLC dba Internet Brands