Prosport triple gauge and Centre pod.
I have a set of smoked 52mm Prosport gauges in a tidy centre New Age pod to find a new home for. Red/White lighting.
Tidy condition. They will come with the wiring from a set of 45 mm gauges so no piggy back power wires but priced accordingly. The wires can be got cheap enough. All sensors are new and unused. Still in the boxes. I swapped to 45mm gauges having changed to a genuine Subaru pod. Just make me a reasonable offer and I'll post them to you. The marks on the font edge are just tape residue I forgot to wipe off. Sorry. https://cimg7.ibsrv.net/gimg/www.sco...0d3108ac59.jpg |
sorry newbie questions what would i need to fit this to my 04 sti impreza. are they led.
and how much are you looking for |
U must have a rough price? |
Scoobynet rules stat you have to have a price listed.
|
What are they, oil pressure, temp and boost appear to be common?
|
Very interested - i have Defi guages in already - would these plug into the existing defi cables?
|
ignkre. Thought I was in non scooby
|
Originally Posted by r4fster
(Post 12032235)
Very interested - i have Defi guages in already - would these plug into the existing defi cables?
|
Originally Posted by Markyscoob
(Post 12032072)
I have a set of smoked 52mm Prosport gauges in a tidy centre New Age pod to find a new home for. Red/White lighting.
Tidy condition. They will come with the wiring from a set of 45 mm gauges so no piggy back power wires but priced accordingly. The wires can be got cheap enough. All sensors are new and unused. Still in the boxes. I swapped to 45mm gauges having changed to a genuine Subaru pod. Just make me a reasonable offer and I'll post them to you. The marks on the font edge are just tape residue I forgot to wipe off. Sorry. https://cimg7.ibsrv.net/gimg/www.sco...0d3108ac59.jpg |
Originally Posted by pjarvis6666
(Post 12032269)
why would you change defi guages for prosport?
This pod looks a lot more slick, Defis arent being sold, just need to find a better way of mounting them...Im all ears if you have any ideas that arent A pillar pods |
My apologies folks. I've been away at work. OK. The pod is glass fibre and needs to be held down at the front with a bit of ingenuity. It came with a pair of clips that were really crap. Some small bolts and washers may do it if you pop the upper vent out to gain access.
I was going to do that but instead saw the nice Subaru DIN shaped pod sold on ICP's site. That made me buy the 45mm gauges to try. They're a lower spec than the 52mm ones, you don't get backlighting and the fancy tracing and peak hold functions these give you though. So pictures so you can see the wiring. The 52mm have facility for piggy backing the power, so you join the power to the first gauge and connect them together. Again, the 45mm doesn't have this. My bad as I reused my power leads and cannibalised the piggy back leads. Sorry! You get the pod, and three boxes (wrong boxes). If I ever do find the correct 52mm boxes I'll send these on as they have the hoods in them. i didn't use them with the pod but you might want to cut them and glue the top halves on. https://cimg9.ibsrv.net/gimg/www.sco...b687d5d96c.jpg The full load to be sent https://cimg7.ibsrv.net/gimg/www.sco...cfd42fb8dd.jpg Hook front end in and slip bolts with coach washers under rear slots. https://cimg9.ibsrv.net/gimg/www.sco...a2578d99de.jpg https://cimg1.ibsrv.net/gimg/www.sco...710d0f67c4.jpg https://cimg4.ibsrv.net/gimg/www.sco...0c9e0564c4.jpg https://cimg5.ibsrv.net/gimg/www.sco...2bbb037bbf.jpg https://cimg8.ibsrv.net/gimg/www.sco...3f93479008.jpg |
So, boost gauge, Oil pressure gauge, Oil temperature gauge. Pod. Instructions and all sensors and looms except piggy back power cables.
You will also need a T-piece adapter to fit to the car's own oil pressure sensor, and fittings to secure rear edge of pod to top dash. I was going to use small coach bolts with large heads and a wingnut. I'll box up and post out to first one to offer me three figures including postage. |
Pm s÷nt
|
Croney. Dude, you need to clear your messages out as I've sent you a PM and it's bounced as your inbox is full.
|
Cleared inbox now
|
Thanks PM sent.
|
did these sell?
|
Not yet. Croney was going to have them but he's not got back to me in about a week.
|
OK. These parts are still available.
|
Doesn't anyone want a bargain?
|
Originally Posted by Markyscoob
(Post 12035710)
Doesn't anyone want a bargain?
|
£150 all in or best offer by end of weekend.
|
Payment sent,
Thanks John |
SOLD to Croney!
Thanks. In the post shortly. |
Recieved, thanks mark
|
All times are GMT +1. The time now is 04:50 AM. |
© 2024 MH Sub I, LLC dba Internet Brands