Mambatek turbos
Im interested in getting one of these for my scoob.
I know there is a couple of threads on here regarding them. Anyone bought one recently and good/bad comments/reviews on them? thanks |
Running one of their Stock Location GTX3076R's on my Closed Deck 2.5, made 477Bhp an 440 lbs ft at 1.6 Bar. Would make more with more boost.
Been on the car over 2k miles now and has been good as gold. They're quality items. |
Originally Posted by ScottyPPP
(Post 12027971)
Running one of their Stock Location GTX3076R's on my Closed Deck 2.5, made 477Bhp an 440 lbs ft at 1.6 Bar. Would make more with more boost.
Been on the car over 2k miles now and has been good as gold. They're quality items. |
Originally Posted by KwikFit
(Post 12027976)
Did You buy twinscroll turbo?
|
I have a GT3071R twinscroll @1.4bar making 432/375 on vpower, fitted to MY03 JDM, Been a great turbo. |
Originally Posted by KwikFit
(Post 12028167)
twinscroll or twinentry?
any graph? op i have seen You are looking for uppipe for singlescroll turbo, do You have another sti apart spec c or You will make spec c singlescroll? |
Originally Posted by KwikFit
(Post 12028167)
twinscroll or twinentry?
any graph? op i have seen You are looking for uppipe for singlescroll turbo, do You have another sti apart spec c or You will make spec c singlescroll? SUBARU WRX STI GDB SPEC-C GT3071R with A/R .71 Twin Entry Turbine Housing Compressor Wheel : 53.1 mm / 71 mm/Trim 56 (11+0 GTX Billet Wheel w/ Extend Tip) Turbine Wheel: 52 mm / 56.5 mm / Trim 84 Compressor Housing Inlet OD: 2.3” / 58mm Compressor Housing Outlet OD: 2” / 51.3 mm Compressor Housing A/R: .57 Turbine Housing A/R : .71 https://cimg8.ibsrv.net/gimg/www.sco...8ac5fbcb8.jpeg |
https://cimg5.ibsrv.net/gimg/www.sco...de0feb4fff.jpg
This is my graph for a GTX3076R on a 2.5 Closed Deck lump with AVCS. |
|
|
Originally Posted by BrownPantsRacing
(Post 12029334)
|
How would a mambatek gt3071 run on an ej207? Has anyone done This?
|
Originally Posted by anthonymcgrath
(Post 12081675)
How would a mambatek gt3071 run on an ej207? Has anyone done This?
|
Originally Posted by ian12
(Post 12082101)
Me, have a look above at my graph and spec. Car now sold now though.
myself I'm just rocking the normal ej205 wrx heads on a brand new ej207 with 0.8mm cosworth head gaskets and ARP studs.. I don't reckon mine would feel quite as good esp with the own 5 speed gbox.. which wouldn't cope with the extra power anyhow really. right now it's on a vf35 and it makes about 13psi at 5000rpm creeping to 14 through the rest of the rev range. |
All times are GMT +1. The time now is 12:05 PM. |
© 2024 MH Sub I, LLC dba Internet Brands