Front mount intercooler on a classic
Hi I'm looking for some inspiration I surpose as to what do with my registration plate on my front mount set up. My number plate is fitted but it doesn't look right in front of the front mount. Also I've had to do away with my front fogs to make it fit.can I have some pictures please of everyone's set up and did anyone do away with there fog lights
|
|
Originally Posted by ossett2k2
(Post 12020312)
|
Had mine fitted in Darlington by the guy that did most of the work for the late, great Harvey Smith. DLM Auto services on Percy Road, 01325 480678
He did remove a lot of bumper, but my driving lights, fitted where the fogs were, still fit, albeit one bolt is replaced by a self tapper. |
Originally Posted by alcazar
(Post 12020352)
Had mine fitted in Darlington by the guy that did most of the work for the late, great Harvey Smith. DLM Auto services on Percy Road, 01325 480678
He did remove a lot of bumper, but my driving lights, fitted where the fogs were, still fit, albeit one bolt is replaced by a self tapper. |
Originally Posted by Rick2017
(Post 12020338)
That's a nice motor same year as mine as well. Did you spray your intercooler with satin black? Also did you have to remove a lot of the bumper to make the cooler fit
not much of the bumper has been chopped by the looks of it. Not the most helpful answer I know lol |
[QUOTE=ossett2k2;12020366]It was fitted when I bought the car,it's a HDI kit so not sure if you can buy black or if it's sprayed?
not much of the bumper has been chopped by the looks of it. Not the most helpful answer Is the hdi kit smaller than the japspeed kit |
Not sure on size difference,no help at all mate,I'll get mi coat.
|
I didn't lose my foglights when I fitted my FMIC. Old, old pic:
https://cimg2.ibsrv.net/gimg/www.sco...27abbfef9a.jpg Changed to fog covers some years ago, with no issue. https://cimg1.ibsrv.net/gimg/www.sco...9ec829d93c.jpg |
Originally Posted by mickywrx
(Post 12020588)
I didn't lose my foglights when I fitted my FMIC. Old, old pic:
https://cimg2.ibsrv.net/gimg/www.sco...27abbfef9a.jpg Changed to fog covers some years ago, with no issue. https://cimg1.ibsrv.net/gimg/www.sco...9ec829d93c.jpg |
Aye, you've got to take a load of the bumper out.
|
Originally Posted by mickywrx
(Post 12020593)
Aye, you've got to take a load of the bumper out.
|
Originally Posted by Rick2017
(Post 12020595)
Did you fit the splitter?
|
Originally Posted by mickywrx
(Post 12020601)
Aye. There's very little in the grand scheme of things that I've had other people do on my car in the last 13 years.
|
Originally Posted by Rick2017
(Post 12020605)
Did you have to trim the splitter down where it meets the front mount?
|
Originally Posted by alcazar
(Post 12020352)
Had mine fitted in Darlington by the guy that did most of the work for the late, great Harvey Smith. DLM Auto services on Percy Road, 01325 480678
He did remove a lot of bumper, but my driving lights, fitted where the fogs were, still fit, albeit one bolt is replaced by a self tapper. |
Originally Posted by alcazar
(Post 12020802)
Sorry, the only pic I have is on photobucket and I don't seem to be allowed to copy it. The car is in the garage and it's VERY tight, so not photographable.
i;ve had one with a side plate as per above and i;ve had another one with a 3/4 plate, never had any issues with being pulled for it. Font and spacing was the same, it was just 3/4 the size and fixed to the front of the top cross piece of the bumper. few options in this thread, https://www.scoobynet.com/scoobynet-...mberplate.html |
That was an interesting read :)
|
https://cimg2.ibsrv.net/gimg/www.sco...e733601e5d.jpgStill not finished. Also its had a front end accident at some point in its life my crash bar is alittle out of shape. Can we still buy these new
|
Originally Posted by Rick2017
(Post 12021177)
https://cimg2.ibsrv.net/gimg/www.sco...e733601e5d.jpgStill not finished. Also its had a front end accident at some point in its life my crash bar is alittle out of shape. Can we still buy these new
|
Originally Posted by sunny1989
(Post 12023807)
ICP still supply them as far as i'm aware, OE equipment.
|
It's gonna take a long time to put right
|
All times are GMT +1. The time now is 10:12 AM. |
© 2024 MH Sub I, LLC dba Internet Brands