If I were you, I'd pretend you didn't see the condition of the standard bushes. :eek:
Just get those bolts removed with a whizzy gun and 6 sided socket and do the inserts. |
Originally Posted by BrownPantsRacing
(Post 12032618)
If I were you, I'd pretend you didn't see the condition of the standard bushes. :eek:
Just get those bolts removed with a whizzy gun and 6 sided socket and do the inserts. |
Originally Posted by Rusti
(Post 12032619)
That sounds like a plan Andy :thumb:
|
Originally Posted by BrownPantsRacing
(Post 12032618)
If I were you, I'd pretend you didn't see the condition of the standard bushes. :eek:
Just get those bolts removed with a whizzy gun and 6 sided socket and do the inserts. |
Originally Posted by Rusti
(Post 12032606)
The question is will the inserts suffice or are we now thinking full poly replacement?
I think I would prefer to put oem ones back in with the inserts (that I've opened) |
Chances are it's just the very outer edges of the bushes that are seeing signs of wear. The mass of rubber actually doing the job will be intact and doing what it's supposed to do.
Get those bolts undone, inspect the bushes and go from there. They may not need replacing, may be superficial external deterioration and not structural in any way. |
All times are GMT +1. The time now is 11:06 AM. |
© 2024 MH Sub I, LLC dba Internet Brands