Low entry ramps for Blob
 

Can anyone recommend some low entry ramps for a Blobeye? Mine is lowered ~25mm. My Bugeye is lowered the same but there is more clearance at the front as the bumper is shorter and angled up.

I don't want to buy any that won't fit so hopefully you'll have some suggestions!

Hiya mate, I also have a Blobeye, lowered about 20mm with a V Limited splitter fitted. I bought these a few years back, just gets up them with a few mm clearance! Not cheap, but it is what it is for long low angle ramps.

https://rover.ebay.com/rover/0/0/0?m...2F251174359693

Ignore that price. They are normally about £150 delivered. Seller seems to have raised the price temporarily due to low stock possibly. Might be worth emailing them.

Sam

If you already have a set of standard ramps then all you need is about a meter of some timber, lay that on the 2nd or 3rd rung up and drive up,
I used a old fence post (cut into 2 x 1 mtr lengths), with a couple of hooks on one end of each, that hooks under the rung, just stops it bouncing when you drive down,
I find this easier for storage as well tbh, and weight for throwing around.

Goggle found these.

https://www.ebay.co.uk/itm/Sirius-Ca...jl9&rmvSB=true

I bought that ebay one (well from MachineMart but it's the same) initially.

Attachment 73360

That's not going to work.

I made wood extenders for the Bug but they are too short and I don't have any spare wood to hand. Also, I figure I may as well get something more substantial if I am going to be using them regularly.

I think that I probably need to try and measure the angle of tyre to lip.

I can't get my trolley jack under the front either (beginning to wonder whether I should convert the front end to Bug....lol )

What are your front ride heights?

Blob is 335mm with 225 tyres
Bug is 330mm with 215 tyres

Just to add, those ramps look too spindly for me to feel comfortable working under the car - are they definitely safe for the weight?

I have some more substantial ramps. I actually only bought the extenders but didn't read the ad properly and the ramps were included.

Got same ones aswell.

Yep , made my own , 4 stages of lift lol

https://cimg1.ibsrv.net/gimg/www.sco...76dbe9b76.jpeg