ScoobyNet.com - Subaru Enthusiast Forum

ScoobyNet.com - Subaru Enthusiast Forum (https://www.scoobynet.com/)
-   Engine Management and ECU Remapping (https://www.scoobynet.com/engine-management-and-ecu-remapping-453/)
-   -   Alcatek mappers (https://www.scoobynet.com/engine-management-and-ecu-remapping-453/1054106-alcatek-mappers.html)

Badgie 30 April 2018 09:42 PM

Alcatek mappers
 
Are there any people who can still map Alcatek ECUs?
Bought a V3 STI that has an Alcatek fitted by Andy Forrest but he doesn't map Classics any more. Don't mind traveling to someone who can map them as it will be alot cheaper than buying a new ECU.

1509joe 30 April 2018 10:21 PM

Don't quote me on this but I think if he's mapped it before he will do it again.

Neilxr 30 April 2018 10:29 PM

Email Andyf just to make sure

sure it was mentioned it was ecutek cars as ecutek has stopped supporting classics

dont know if does your ecu but stated he doesn’t do link ecu

Badgie 30 April 2018 11:05 PM

I've already got in touch with Andy. The response I got was ""Hi Alastair
I don't map any of the classics anymore I'm afraid. Sorry I can't be of more help.
regards
Andy."

ossett2k2 30 April 2018 11:15 PM

Martyn Jeffrey engine tuner?

trevsjwood 30 April 2018 11:20 PM

try Bob Rawle, he gets around a lot so might be worth an ask.
Trev

Neilxr 01 May 2018 07:11 PM

Tried andyf’s website but seems to be down

scooby2.5maz 01 May 2018 09:14 PM

your best bet is getting the mapper who mapped it last as trying to get hold of andy from alacatek im hearing is not gonna happen !!!

johnlogie 01 May 2018 11:25 PM

Russ Paton, RA Motorsports in Perth

stonejedi 02 May 2018 01:44 PM

The only person that can map your ecu is the original mapper which in your case will be Andy F....Unless you get your Alcatek ecu code opened up,and the only person that can do that would be Mr Alcatek himself....he is suppose to be in hiding according to my mate that is in the same boat as you,thats why you keep on seeing Alcatek ecu's regularly coming up for sale these days:Whatever_It seems people are just selling the problem on to other unexpected members.My mate has decided to get a new ecu fitted now as quite frankly he's had enough.SJ.

The Rig 02 May 2018 01:53 PM


Originally Posted by stonejedi (Post 12008236)
The only person that can map your ecu is the original mapper which in your case will be Andy F.....

Well considering the Original Mapper now refuses to map Alkatek ECU`s fitted to classics id say this ECU is defunct and for the bin ( if changes are required)

Crazy scenario !!

Badgie 02 May 2018 02:17 PM


Originally Posted by scooby2.5maz (Post 12008157)
your best bet is getting the mapper who mapped it last as trying to get hold of andy from alacatek im hearing is not gonna happen !!!

Already tried that. AndyF no longer maps Classics or Alcatek ECUs


Originally Posted by stonejedi (Post 12008236)
The only person that can map your ecu is the original mapper which in your case will be Andy F....Unless you get your Alcatek ecu code opened up,and the only person that can do that would be Mr Alcatek himself....he is suppose to be in hiding according to my mate that is in the same boat as you,thats why you keep on seeing Alcatek ecu's regularly coming up for sale these days:Whatever_It seems people are just selling the problem on to other unexpected members.My mate has decided to get a new ecu fitted now as quite frankly he's had enough.SJ.

Aye, I've read most of the horror stories about people not able to get their cars mapped. Spoke to ScoobyClinic and they are still waiting for ECUs from March last year they sent off.


Originally Posted by The Rig (Post 12008237)
Well considering the Original Mapper now refuses to map Alkatek ECU`s fitted to classics id say this ECU is defunct and for the bin ( if changes are required)

Crazy scenario !!

Aye, it's a bit of a crap situation. Atleast I'll have a fancy paper weight now.

domino46 02 May 2018 02:32 PM

got my ecu's back from Andy today so they are still doing them there just a bit behind lol

bob rawle still maps them

Badgie 02 May 2018 02:46 PM


Originally Posted by domino46 (Post 12008244)
got my ecu's back from Andy today so they are still doing them there just a bit behind lol

bob rawle still maps them

How did you get in touch with Andy? Did you phone or email him or did you just send it off with a note?

trevsjwood 02 May 2018 03:55 PM


Originally Posted by Badgie (Post 12008249)
How did you get in touch with Andy? Did you phone or email him or did you just send it off with a note?

your best route would be to do it through the mapper you choose now to map your car. He would liase with AndyF/ Alkatek to get the ecu code/unlocked. I wouldn't be put off by Scoobyclinic's comment. Bob Rawle is a good option if he's up your way and if no one nearer.
Trev

SmurfyBhoy 02 May 2018 04:13 PM


Originally Posted by Badgie (Post 12008249)
How did you get in touch with Andy? Did you phone or email him or did you just send it off with a note?

Andy is quite active on Facebook if you drop him a mail

Or ask on few groups no doubt someone will Tag him

stonejedi 02 May 2018 04:24 PM


Originally Posted by The Rig (Post 12008237)
Well considering the Original Mapper now refuses to map Alkatek ECU`s fitted to classics id say this ECU is defunct and for the bin ( if changes are required)

Crazy scenario !!

That's about right mate:brickwall,i think the ecu is practically obsolete now,its a sad state of affairs.Im pretty glad that I went Syvecs:D.SJ.

trevsjwood 02 May 2018 05:12 PM

I also read in a recent post:- 'AndyF no longer maps classics because of lack of support from EcuTek' which did seem strange as Paul Blamire went there when he handed over the reigns at Zen.
Trev

johnlogie 02 May 2018 05:21 PM

As I said before, try Russ Paton at RA. Andy used to do mapping days at RA and I’m sure Russ has a good relationship with him. Andy could possible send Russ the original map.
It’s worth asking the question

trevsjwood 02 May 2018 05:30 PM


Originally Posted by johnlogie (Post 12008267)
As I said before, try Russ Paton at RA. Andy used to do mapping days at RA and I’m sure Russ has a good relationship with him. Andy could possible send Russ the original map.
It’s worth asking the question

My Alkatek was first mapped by JGM when I bought it off here, then Bob Rawle and lastly Duncan. Never a problem

domino46 02 May 2018 05:46 PM


Originally Posted by Badgie (Post 12008249)
How did you get in touch with Andy? Did you phone or email him or did you just send it off with a note?

sent it off with a note ,, there was a delay with mine due to needing a repair but it was done for free so can't complain

domino46 02 May 2018 05:50 PM


Originally Posted by stonejedi (Post 12008262)
That's about right mate:brickwall,i think the ecu is practically obsolete now,its a sad state of affairs.Im pretty glad that I went Syvecs:D.SJ.

just had two updated and moved over to bob and I just sent them with a note inside saying what I wanted doing :thumb:

stonejedi 02 May 2018 05:59 PM


Originally Posted by domino46 (Post 12008270)
just had two updated and moved over to bob and I just sent them with a note inside saying what I wanted doing :thumb:

How,Who,Where?:).SJ.

stonejedi 02 May 2018 06:07 PM

My mate was going to Get another mapper to map his car but was told that the original mapper is the only person who could map it, which sounds a bit fishy too me :wonder:and was also told that he needed a unlocking code but when he contacted RaceDynamics he was told no such code existed....Who do you believe?.SJ.

domino46 02 May 2018 06:24 PM


Originally Posted by stonejedi (Post 12008272)
How,Who,Where?:).SJ.

sent them back to alcatek with a note inside with my details and saying update and move over to bob :thumb:

johnlogie 02 May 2018 06:44 PM


Originally Posted by trevsjwood (Post 12008268)
My Alkatek was first mapped by JGM when I bought it off here, then Bob Rawle and lastly Duncan. Never a problem

My ECU was also originally mapped by JGM. Russ had to get a file from Andy to remap it though

Badgie 03 May 2018 06:02 PM

Thanks for the help everyone. After a few phone calls yesterday and today, RA Motorsport are buying all Andy Forrests old Alcatec software, cables and previous maps so they will soon be able to map them.

The Rig 03 May 2018 06:46 PM

Crikey, thats a cornered market then !

Neilxr 03 May 2018 09:33 PM

So Andy isn’t doing link ecu, alcatek ecu or ecutek in classic or any classic

what does that leave him

syvecs only and open source ?

how many folk that have been mapped by him with classics still have them or with after market ecu


Neilxr 04 May 2018 04:03 PM

Asked Andy what ecus you still tune

smswer new age ecutek only


All times are GMT +1. The time now is 08:10 AM.


© 2024 MH Sub I, LLC dba Internet Brands