ScoobyNet.com - Subaru Enthusiast Forum

ScoobyNet.com - Subaru Enthusiast Forum (https://www.scoobynet.com/)
-   General Technical (https://www.scoobynet.com/general-technical-10/)
-   -   Syvecs which one to buy ? (https://www.scoobynet.com/general-technical-10/1053063-syvecs-which-one-to-buy.html)

RAGGY DOO 26 February 2018 09:05 PM

Syvecs which one to buy ?
 
Ok need to get my arse in gear and buy the ecu
I have had 3 quotes from big scooby suppliers

First said I need a s6 pnp
Second a s6 and a can bus adapter
Third a s6 gp plus a loom adapter

So I’m confused.com
Don’t want to get the wrong ecu l/ loom

Anyone ?

bengo 26 February 2018 09:16 PM

If newage s6 pnp

RAGGY DOO 26 February 2018 09:17 PM

Jdm sti hatch matey

ZANY 27 February 2018 04:54 AM

I’d get a toucan display in that list if it was me ;)

always wanted one but they don’t work on std ECUs :(

That’s If you haven’t got one allready pal :thumb:

stonejedi 27 February 2018 07:55 AM

2008 hatch S6GP pnp or 2008+ Hatch S6 Plus pnp.SJ.

Don Clark 27 February 2018 08:22 AM


Originally Posted by RAGGY DOO (Post 11997656)
Ok need to get my arse in gear and buy the ecu
I have had 3 quotes from big scooby suppliers

First said I need a s6 pnp
Second a s6 and a can bus adapter
Third a s6 gp plus a loom adapter

So I’m confused.com
Don’t want to get the wrong ecu l/ loom

Anyone ?

Why not try "direct from the horse's mouth"

http://www.syvecs.co.uk/contact/

RAGGY DOO 27 February 2018 08:40 AM

Have sent syvecs a email
Goin to use tousan and sensor kit also

hedgecutter 27 February 2018 10:21 AM

Gp version easier to move to other vehicles, or sell on, pnp version specific to your vehicle ; your choice

RAGGY DOO 27 February 2018 11:17 AM

So the pnp just plugs in off you go no arsing around ?

Don Clark 27 February 2018 12:04 PM


Originally Posted by RAGGY DOO (Post 11997741)
So the pnp just plugs in off you go no arsing around ?

But is it suitable for the JDM version and no tumbler valve support

http://www.syvecs.co.uk/products/eng...inc-hatchback/

RAGGY DOO 27 February 2018 12:55 PM

Just had a response from syvecs said I would require the new syvecs s6i ecu at 1950 plus vat

Don Clark 27 February 2018 01:18 PM

http://www.syvecs.co.uk/products/eng...t-system/s6-i/

Tidgy 27 February 2018 01:32 PM


Originally Posted by RAGGY DOO (Post 11997656)
Ok need to get my arse in gear and buy the ecu
I have had 3 quotes from big scooby suppliers

First said I need a s6 pnp
Second a s6 and a can bus adapter
Third a s6 gp plus a loom adapter

So I’m confused.com
Don’t want to get the wrong ecu l/ loom

Anyone ?

have a chat with clinic dude. Given whos on site im sure they can advise best route to go lol

RAGGY DOO 27 February 2018 01:39 PM

the s6i requires no additional wiring looms or fitments which is good news
Strong possibility I may have the work carried out in Ireland see what next few months bring, right let’s get this bad boy ordered up

bustaMOVEs 27 February 2018 07:24 PM


Originally Posted by RAGGY DOO (Post 11997714)
Have sent syvecs a email
Goin to use tousan and sensor kit also

Syvecs do a proper Gucci screen, look at plex

RAGGY DOO 27 February 2018 07:26 PM

As much as a self confessed brand whore that I am
No way could I Justify four times the cost of tousan

ZANY 28 February 2018 04:20 AM


Originally Posted by RAGGY DOO (Post 11997850)
As much as a self confessed brand whore that I am
No way could I Justify four times the cost of tousan

Tight arse pusssaaaaay :p

ZANY 28 February 2018 04:22 AM


Originally Posted by bustaMOVEs (Post 11997848)
Syvecs do a proper Gucci screen, look at plex

You got Gucci chaddi aswell I bet :D .... :lol1:

RAGGY DOO 28 February 2018 09:32 AM

Peer pressure now to my the plex

ZANY 28 February 2018 02:08 PM


Originally Posted by RAGGY DOO (Post 11997929)
Peer pressure now to buy the plex

With all them “golden bits” you put on upgrading the suspension etc you should go all out I would :thumb:

Get yourself a brand new genuine front lambda aswell while your at it bro ;)

RAGGY DOO 28 February 2018 02:42 PM

Fit 2 brand new genuine lambda sensors already mate
Does anyone know the main differences with the plex over the tousan ?
To make it justifiable?

stonejedi 28 February 2018 03:41 PM

Just have a read through the stats,their is no use getting a display with functions that your never going to use,just for bling:lol1:http://www.syvecs.co.uk/products/displays/.SJ.

ZANY 28 February 2018 03:54 PM


Originally Posted by RAGGY DOO (Post 11997993)
Fit 2 brand new genuine lambda sensors already mate
Does anyone know the main differences with the plex over the tousan ?
To make it justifiable?

Justifiable to whom ?

yourself or the whip that wears the trousers ? :)

RAGGY DOO 28 February 2018 03:57 PM

Oh I’m the boss mate
If they do the same thing I’ll prob buy the tousan

ZANY 28 February 2018 04:06 PM


Originally Posted by RAGGY DOO (Post 11998007)
Oh I’m the boss mate
If they do the same thing I’ll prob buy the tousan

Only ragging about mate :thumb: :lol1:

I’d love to have a toucan display they certainly rock my boat :D

I might just go down the route of a DIFFRENT ecu just for the fack of it to get a toucan display before end of year always wanted one

RAGGY DOO 28 February 2018 04:13 PM

The plex looks the business too gotta have a good think

bustaMOVEs 28 February 2018 07:07 PM

Read it done more, google some video and that should be decision made lol. Has way more features than toucan

bustaMOVEs 13 September 2018 09:17 PM

Or you could buy the Bluetooth module and get syvecs app on iPad (still a pricey route) so toucan is the cheapest option.

RAGGY DOO 13 September 2018 09:57 PM

Already bought the toucan and the syvecs mate


All times are GMT +1. The time now is 02:39 AM.


© 2024 MH Sub I, LLC dba Internet Brands