Rcm rotated oil drain
 

Any about before I buy new?

What turbo you fitting Gaz ??

I wasnt prepared to pay the £120 for the rcm item so i made my own which works and fits perfectly and cost less than a quarter of the price.

i used

(EBAY) Epman EP-TF006 £7.99 (GT35 OIL RETURN FLANGE AN-10)
(MOTORSPORT TOOLS) MOTAMEC MSTF0209-10 £4.36 ( AN-10 STRAIGHT FITTING FOR SOCKETLESS HOSE)
(TORQUES) AQPOHA-10 (1 METER) £11.85 AN-10 SOCKETLESS HOSE

It’s a garrett gt30. I know what you mean. 120 for the small pipe does seem a lot. I will have a look at those bits. Thanks. Have you any pics?

It will be the same items you need then mate for a gt30.

I didnt take any pictures of it but its just basically a flange that bolts to the bottom of the turbo with a male an-10 fitting. Then a male hose fitting that tales socketless hose and the other end of the hose just slides onto the oil return pipe attached to the rear of the engine.

.

https://cimg8.ibsrv.net/gimg/www.sco...60c1a71267.jpg

https://cimg1.ibsrv.net/gimg/www.sco...7430ff6df6.jpg

https://cimg4.ibsrv.net/gimg/www.sco...8c8e9c22a9.jpg

That looks simple enough. Thanks I will get it ordered:thumb:

:thumb: