RAL Code 2018 calipers ?
 

Any one know the RAL code for the yellow 2018 calipers ?
I’m gonna tear my Hawk calipers ( well not literally) off next week along with other things so fancy this
Also want to replace the brembo decals with STI
Anyone know where I can purchase these from also
Kindest regards mic

https://cimg1.ibsrv.net/gimg/www.sco...9d4277b7d.jpeg

https://cimg2.ibsrv.net/gimg/www.sco...895a269a7.jpeg

Car needs a winter update / wheels are black once again
& I’m gonna get rid of the rear firewall put the rear seats & belts back in & put the spoilered boot back on. / front mount wants re painted along with front wishbones & ARB ,,, something to do over the dark weekends I guess lol

Don Clark , surely you can help ???

Found this
It’s def not the right shade , not sure to give it a try
https://rover.ebay.com/rover/0/0/0?m...2F263279425422

I very much doubt a RAL code is available or known. Most manufacturers of wheels and Brakes “mix” they’re own Colours.

As you won’t need to match exactly a nearly the same would nave good enough.

Tony

:lol1: Only just seen this thread.
Nearest RAL colour in the K7 classic list is RAL1016 (Sulfur yellow}

https://cimg5.ibsrv.net/gimg/www.sco...d485a1f24a.png

Thanks for reply guys
I’ll give it a look , / not sure weather to wet paint or powder ( prob wet , I always get the calipers on my bikes powder but I find they crack around the bleed nipples with time ( the paint that is , happened with several so wasn’t just a one off . I wet painted the calipers blue that are on the Hawk now , they look ok , but not excellent so I’m in 2 minds .

Further to previous reply there is also RAL1026 (leuchtgelb or luminous yellow)
http://pulvertech.de/media/images/or...Leuchtgelb.jpg

https://scontent-lht6-1.xx.fbcdn.net...97&oe=5A6ED45D

Yes I think that’s more like it
I had in my mind it was like the “ mellow yellow “ NASCAR shade back in the day.. think that one above migh just be the one
Thanks Don

A better picture

https://i350.photobucket.com/albums/...v.jpg~original

Nice 1 Don
Def goin for it lol

So had a free day today ...
Time to get the brakes off / strip / box & sort
Quite a nice big bag of bolts , clips , nuts , washers etc for plating . Calipers all ready + bells & a few other bits . But as it’s a full refresh I’d rather take them for paint with the other bits I’m taking off . But hey ho it’s a start .

https://cimg9.ibsrv.net/gimg/www.sco...b449761ed.jpeg

https://cimg0.ibsrv.net/gimg/www.sco...192655b77.jpeg

https://cimg1.ibsrv.net/gimg/www.sco...8abc7f3c2.jpeg

https://cimg2.ibsrv.net/gimg/www.sco...d9309c1c9.jpeg

All sorted now & looking very tasty indeed ( amazing job by my painter & friend Bill ,

https://cimg1.ibsrv.net/gimg/www.sco...38637af09.jpeg

As good as new

https://cimg3.ibsrv.net/gimg/www.sco...891fa5260.jpeg

https://cimg4.ibsrv.net/gimg/www.sco...a88b682ac.jpeg

looks good!

Thanks Harry
Yea looks amazing to the eye
I’ll build the calipers up next weekend when I have a bit more spare time
I’ll show something a bit different there also regarding the bolts lol

So finished putting the calipers together Sunday after a nice lunch , had a bit of a pickle with the front off side internal O ring passage way seal , it was looking very perished ( I improvised & used a tiny grommet ( cut the top off & made the hole so it would sit in its depression & still compress as a 0 ring seal . Job done /
Ps if any one knows where I can get the correct seal or has a part number I could always use & change out . Contacted Ian , SG Petch & import car parts today just to see if this item is avail , no luck - wich is why I made one as on looking at repair kits ( none ) had this 0 ring for front brembo , none I found anyway.
Regards mic

https://cimg1.ibsrv.net/gimg/www.sco...3eb95e1c6.jpeg

Happy with the result , turned out ok in my eye .

https://cimg1.ibsrv.net/gimg/www.sco...d84b895ae.jpeg

That looks savage bud

Thanks Raggy
I think so , well happy lol

Looking good :thumb:, no decals?

How about a side on to see both front and rear?

Havnt fitted the rear’s yet Don as stripping the back now ,
Here’s a side from the right tho , yes decided not to go for decals , I really wanted them to “pop” wich they certainly do lol. Also didn’t want painted bolts so bought new & passivated then gold , put a lot of time in on these but think it’s payed off , bloody cold outside at mo putting front back together but sorted now :)

https://cimg1.ibsrv.net/gimg/www.sco...580c0a500.jpeg

Thanks Rab

Mods if you want to move this thread to wheels, tyres , brakes be my guest . Maybe i should have initially posted in there . Ta :)

“Finished Product “
I purchased some speed bleeders for all the calipers also so did all 4 corners at same time , very handy .

https://cimg1.ibsrv.net/gimg/www.sco...f7c3f63c1.jpeg

Looking good.

http://www.speedbleeder.com/speedbleederlogo22.gif
should come with these as OEM ;) :thumb:
http://www.speedbleeder.com/images/sbani.gif

Yea couldn’t agree more Don