Classic RA Roof Vent
 

Thinking of sorting out a classic ra roof vent so need to replace a few bits on it. Easy job lol yeah right it seems ICP only have certain bits and can't find the part numbers.

The bits needed are internal trim screws, most of the screws and the bit that connects the roof flap to the handle. Had a look on opposed forces but seems to only show European cars :wonder:

Any assistance is much appreciated

Not an essential part but the sticker on the inside was thinking of painting it again.

:thumb: Thanks mate

Had a look on there a while back and couldn't find anything, looks like I was typing the wrong thing in.

So close thought I had it then lol

https://cimg0.ibsrv.net/gimg/www.sco...b912eeb8de.jpg


The bit in the picture is what I need but can't seem to find any part numbers

Does any body know

Had a call from Subaru parts UK and they only sell with the vent so its £329 just to buy that nut

Someone on here must know if there is a different part number or what else could be used

https://cimg7.ibsrv.net/gimg/www.sco...ca79cb90f5.jpg

Part needed

The boss (which you circled above ) to which the roof vent lock (65448FA000)

http://i.ebayimg.com/images/g/UDoAAO...4P/s-l1600.jpg



http://www.sprintingharejdm.co.uk/im...t4-600x475.jpg

screws to the roof vent is only available with the vent (along with the screw).

All other parts can be found separately.

Parts diagrams and part numbers re-established
Classic version

https://cimg5.ibsrv.net/gimg/www.sco...55450e3c04.jpg
https://cimg9.ibsrv.net/gimg/www.sco...fe38124f28.jpg

Newage

https://cimg3.ibsrv.net/gimg/www.sco...2b102ce11e.jpg
https://cimg0.ibsrv.net/gimg/www.sco...093d3e2a6c.jpg

Thanks Don much appreciated :)

I was really hoping you weren't going to say that lol. When you say boss is it the rivet type that the screw then attaches the handle to. Any idea of alternatives or if the Spec C ones are sold and will fit.

https://www.japanparts.com/images/im...b.php?no=46877

Items
65288
65268
65475
733B8
Q680001


Thanks again guys

Thanks Don :thumb:

I assume you work at Subaru Parts UK ;)

:D
Nope - just access to the software for Europe and Japan

Given the part numbers to Subaru so it should be easier to locate them. Will let you know if they find the parts

Have just done a search on some of the part numbers and it looks like they are used on a 1988 Justy for the opening rear side window catch and hinges.............

https://i.pinimg.com/736x/b7/11/3a/b...apan-style.jpg

I did a quick search and I found they were from a different model earlier on :lol1:

Its unlikely they they would have two different things with the exact same part number :Suspiciou

Loads of models share the same screws etc so lets see if it fits. This is from a Spec C going into a classic RA vent thats a whole different thing lol. If it does work out then saves others from buying a complete lid.