Fitted new side wing badges, look much better than the chrome originals imo. https://cimg6.ibsrv.net/gimg/www.sco...c4486ccc93.jpg

Black ones look so much better on white, and well done for calling them correct name lol

Should of got OEM ones, there a better fit and not so long.

I had oem ones on the rear (factory fitted I assume) and nothing on the front, and they were rubbish. They have little pockets on them that collect crud and stones and as soon as you go over a pot hole or bump it all jumps out at the car behind.

In the end I went for minis from Scoobyworld.com

Now there on I quite like them.

In the UK there called registration plates or number plates.

License plates don't exist in the UK :thumb:

Got the new stereo installed and all set up with my phone, just get in the car and it automatically connects to my phone and plays my music, exactly what I’ve been after. I may adjust the brackets and drill new holes to it sits perfectly flush with the facia one day but for now I hardly notice.

https://cimg4.ibsrv.net/gimg/www.sco...0e5711385.jpeg

Good mod nice piece of kit had one also it has loads of DIFFRENT colours to chose from to suit the dash lights :thumb:

It’s a nice simple unit that just does it’s job well. Just need to set up the microphone for hands free calling now as I forgot about it, then it’s finished

Not a mod as such but "adjusted" the front brake disc shields - no more annoying "skeleton w@nking in a biscuit tin" sound!

No mods here, popped out last night for fuel to car not starting once I’d filled up so quick trip to halfrauds £61 on trade not to bad.

Guages to finish off my center console
https://cimg5.ibsrv.net/gimg/www.sco...e6c96eeedb.jpg

Headlights polished, much better finish this time.

Dipped beam bulbs replaced with Philips X-treme Vision, should have been a 20 minute job but ended up taking much longer as the passenger side bulb cover would not come off. Grrrr

Managed to get hold of a set of some 18" Prodrive GC-07 forged alloys, not completely mint but will be refurbished in early next year.

Photos aren't brilliant but it was cold and I wanted to crack on.
https://cimg9.ibsrv.net/gimg/www.sco...f3a76e7bf1.jpg


https://cimg1.ibsrv.net/gimg/www.sco...87dc0776bd.jpg

Need bigger brakes as my 330 discs look tiny under 18" wheels :cry:

Red knob



https://cimg3.ibsrv.net/gimg/www.sco...097c47e82e.jpg

Braided sti jdm clutch hose mod
 

These should come as standard on the sti’s
wow what a difference in pedal feel shame it’s under the intercooler so can’t really be seen :( but a pretty easy yet effective mod - upgrade

Few pics before I put it on


https://cimg3.ibsrv.net/gimg/www.sco...a4f65e90c.jpeg

https://cimg5.ibsrv.net/gimg/www.sco...782a8b1dd.jpeg

https://cimg9.ibsrv.net/gimg/www.sco...496c46e2e.jpeg

Last piece of the center consle to do was red hvac leds. The green were nasty

https://cimg0.ibsrv.net/gimg/www.sco...1f84a75181.jpg


https://cimg3.ibsrv.net/gimg/www.sco...01a7f11eb8.jpg

Nothing fancy just these and front and rear ARBS ...

http://i285.photobucket.com/albums/l...AA1743F23A.jpg

Oooh shiny. What are those im drooling?

Kw variant 3, with 22mm front and 24mm rear whiteline ARBs. Also replaced the bushings and mountings plus OEM bolts for the lot. Full alignment with “fast road” set up.

Transformed the car.

Very nice :notworthy

De-cat down pipe, fuel pump & plugs yesterday. booked in at Evotune on Tuesday ?????? I'll post results

Car has had a full service including timing belt and RCM fuel pump.

https://cimg4.ibsrv.net/gimg/www.sco...e18779578.jpeg

I think the plugs were well needed

https://cimg5.ibsrv.net/gimg/www.sco...ccc998ff7.jpeg

https://cimg6.ibsrv.net/gimg/www.sco...59d708c46.jpeg

Lefty its known that the iridiums arent great on subaru's. Stuck with platunum they last longer and probably perform just as good or better

I did an oil change, changed my spark plugs, a pair of number plate bulbs, moved the number plate lower as it couldnt be seen on the rear and gave her a wash


https://cimg4.ibsrv.net/gimg/www.sco...13ba9032b.jpeg

https://cimg5.ibsrv.net/gimg/www.sco...14120acac.jpeg

https://cimg0.ibsrv.net/gimg/www.sco...bab8784b7.jpeg

https://cimg3.ibsrv.net/gimg/www.sco...8b59d5c53.jpeg

Looks really nice, how much for old wheel? :thumb:

Thought i would take advantage of the last £1 listing day and put the wheels up for sale, sold them for £400 literally within twenty minutes. The guy drove 2 hours to pick them up. Should have listed them for more!

For my Winter fun, I've got a set of Goodrich braided hoses, and rebuilt the calipers. Disc have been blasted clean of rust (not been using the old girl) and also I've cleaned off the rust on the backplates and painted them with black zinc paint.

New BC-ZR Struts fitted, just need to make brackets up for the gas bottles that are attached with hoses to the top mounts. Loads of new bolts all over the underside.

Next job is a new Timing Belt kit and then I might even get it off the stands and drive the old thing.

Its Kim joug-un, don.

Ah no, should of tried them on here first.

I tried and failed at fitting a brake stopper.... :rolleyes:

I thought it would be pretty straight forward, but i think i might have the wrong kit for my model. Does any body have a pic of one fitter to a classic. I have the Tegiwa kit.

TIA.

The dog’s! 👌🏾 👍🏾