Never liked morette headlights on any Impreza, apart from the Bugeye, as standard lights look awful. Can't see what can beat oem lights on a classic.
|
if you need another badge i have a pink and black one.
Originally Posted by Itamar_M
(Post 12061332)
It looked much better imagining it in my head.
I must admit, I wasn't as excited as I thought I would be when seeing the final result for the first time. The next exterior mod in line are the Morette headlights which should complete the look (or at least so I hope). So time will tell if the mesh grille was a right move or not. https://cimg2.ibsrv.net/gimg/www.sco...568b353d52.jpg https://cimg7.ibsrv.net/gimg/www.sco...01e6f8dffd.jpg I apologize for the bed pictures |
Originally Posted by jaygsi
(Post 12064123)
if you need another badge i have a pink and black one.
I only just got rid of mine lol |
There is some lovely blobeye morettes for sale in the classified :top:
Also - any opinions on the Zunsport lower grills? - Good quality any alternatives, I want black like this .. http://scoobyworld.co.uk/catalog/ima...obeye_3318.jpg |
Zunsport do them in black. Mine have been on nearly two years now and still look as good as the day i got them. The quality of the zunsport ones is brilliant.
|
Originally Posted by Jon T
(Post 12065043)
Zunsport do them in black. Mine have been on nearly two years now and still look as good as the day i got them. The quality of the zunsport ones is brilliant.
|
but will it go faster...................
|
Originally Posted by ray54
(Post 12065072)
https://cimg6.ibsrv.net/gimg/www.sco...28f867b650.jpg
https://cimg0.ibsrv.net/gimg/www.sco...0c3c6e4d87.jpg Thats added at least 100bhp :lol: |
Speedlines fitted, now sitting back admiring. Beer imminent
https://cimg2.ibsrv.net/gimg/www.sco...7800d9aa0.jpeg |
Ah seen those on eBay. Stop doors getting dented in.
Originally Posted by RickyP
There is some lovely blobeye morettes for sale in the classified :top:
Also - any opinions on the Zunsport lower grills? - Good quality any alternatives, I want black like this .. http://scoobyworld.co.uk/catalog/ima...obeye_3318.jpg
Originally Posted by ray54
https://cimg6.ibsrv.net/gimg/www.sco...28f867b650.jpg
https://cimg0.ibsrv.net/gimg/www.sco...0c3c6e4d87.jpg |
New headlights fitted
https://cimg7.ibsrv.net/gimg/www.sco...ae22dab836.jpg |
Rear calipers
My rear brembos desperately needed a re-paint! And I’m well chuffed with the results!
https://cimg8.ibsrv.net/gimg/www.sco...f5ac9d36b.jpeg https://cimg2.ibsrv.net/gimg/www.sco...0d528be554.png https://cimg6.ibsrv.net/gimg/www.sco...450147545.jpeg https://cimg9.ibsrv.net/gimg/www.sco...5826753118.png |
https://cimg8.ibsrv.net/gimg/www.sco...d13c026ca8.jpg
Fitted this alloy strut brace originally supplied by TSL but not sure if they fabricated it or not. Lovely bit of kit though and was silly expensive when new. |
I have a huge list of things I want to do to my car and this probably could have waited but it looks so much better.
Is it simple to fix the rattle from the reverse lifter? https://cimg4.ibsrv.net/gimg/www.sco...a5289c6a93.jpg https://cimg8.ibsrv.net/gimg/www.sco...c281ccb37d.jpg |
Finally sourced a clip from the air box and quickly snapped my broken one.
the pipes were not moving but it's more secure now. https://cimg1.ibsrv.net/gimg/www.sco...8e9f0c4f6d.jpg |
Finally upgraded all speakers with Shaun's 3d printed spacers and sound deadening.
Sounds a lot better over standard https://cimg2.ibsrv.net/gimg/www.sco...0e0706adb0.jpg https://cimg8.ibsrv.net/gimg/www.sco...6a4dd2f06d.jpg https://cimg4.ibsrv.net/gimg/www.sco...058cad9dba.jpg |
Originally Posted by RobsyUK
(Post 12069176)
Finally sourced a clip from the air box and quickly saapped my broken one.
the pipes were not moving but it's more secure now. https://cimg1.ibsrv.net/gimg/www.sco...8e9f0c4f6d.jpg It's the little things that make all the difference! |
Originally Posted by Itamar_M
(Post 12069193)
It's the little things that make all the difference!
Sure is. I need the little tube of plastic that goes on the header tank but cant find it anywhere |
Originally Posted by RobsyUK
(Post 12069194)
Sure is.
I need the little tube of plastic that goes on the header tank but cant find it anywhere Which tube is that? DO you have a picture? |
Originally Posted by Itamar_M
(Post 12069195)
Which tube is that? DO you have a picture?
https://cimg7.ibsrv.net/gimg/www.sco...46f93511e5.jpg |
New front strut brace
Fitted a new front strut brace after finally finding one that fits over my top mount!. Ultra racing sell some nice bits actually!.
https://cimg1.ibsrv.net/gimg/www.sco...790847ed9.jpeg |
hks hi power 76 mm cat back with little polishing :) (braces will change stainless one again previous owner did something wrong)
https://cimg4.ibsrv.net/gimg/www.sco...a49f26f831.jpg https://cimg3.ibsrv.net/gimg/www.sco...ad8291a8ff.jpg |
I updated the Software on the SPH DA-120 Head unit to the latest version and changed the pollen filter. :banana:
|
New battery clamp
Since getting my hawk the positive battery terminal wouldn't tighten leaving the clamp loose. The only fix was to put a screw in it to tighten it.
Worked forever until someone in Russia sold me one for £11 delivered. So much cheaper then Subaru and I really don't like fitting second hand if I can help it. Literally a 5 minute job. https://cimg2.ibsrv.net/gimg/www.sco...14537de846.jpg https://cimg5.ibsrv.net/gimg/www.sco...034edaf2c4.jpg |
My DAB signal is truly shocking and someone mentioned that the sticky copper section needs to stick to metal. I didn't realise this but went to tackle it today.
I can't stick the aerial any higher up and therefore can not stick the copper section to the roof of the car. It's just not long enough. https://cimg2.ibsrv.net/gimg/www.sco...63b5589622.jpg A quick think and wrapped the copper in tin foil and joined it to a long section above the headlining. It's better then it was but still drops out. Anyone else have a dab working? |
2 Attachment(s)
Originally Posted by RobsyUK
(Post 12070410)
My DAB signal is truly shocking and someone mentioned that the sticky copper section needs to stick to metal. I didn't realise this but went to tackle it today.
I can't stick the aerial any higher up and therefore can not stick the copper section to the roof of the car. It's just not long enough. (use the sun visor screw) https://cimg2.ibsrv.net/gimg/www.sco...63b5589622.jpg A quick think and wrapped the copper in tin foil and joined it to a long section above the headlining. It's better then it was but still drops out. Anyone else have a dab working? https://www.dabonwheels.co.uk/produc...mount-aerials/ I see where you are coming from, just solder a length of wire to it and connect the other end to earth. Maybe the orientation is wrong or you need an amplified aerial |
Never though of soldering to it. Nice one👍.
It's the right one for the head unit with power to it turned on. |
Wanted to do this for over a year and finally think itll lool awesome when the new grill arrives.
Put the plate on a bracket for it to sit in the hole rather then on the bumper. Just need to replace the screws with black ones. https://cimg2.ibsrv.net/gimg/www.sco...2e6891a036.jpg |
Ooh I like that where did you get it from ?
|
Originally Posted by Jon T
(Post 12071647)
Ooh I like that where did you get it from ?
ablut £30 for both bits Similar to this https://www.wish.com/m/c/5bee7db78719dd1723e9ab73?hide_login_modal=true&fro m_ad=goog_shopping&_display_country_code=GB&_force _currency_code=GBP&pid=googleadwords_int&c=%7Bcamp aignId%7D&ad_cid=5bee7db78719dd1723e9ab73&ad_cc=GB &ad_curr=GBP&ad_price=6.00&campaign_id=8163884845& gclid=CjwKCAiA1fnxBRBBEiwAVUouUnRM7F7VfBDf-wM_WQZpJF1EKeWzcv_CPmOTBeJZIE_q2xWV3udAHRoCbeQQAvD _BwE Mounted the sti plaque using the top holes and hindge the plate. I think it looks better in the hole. |
All times are GMT +1. The time now is 09:56 AM. |
© 2024 MH Sub I, LLC dba Internet Brands