Rear disc replacement
 

trying to get the rear discs of my hatch. Any idea how to do this ? I've theirs everything

HI
Once you get the caliper off , the disc will just pull off , if it's stuck and wont move at all , it's probably corrosion holding it in place , tap it with a mallet on the outer diameter to ' break the seal ' , it will come off then .

If it moves a bit but jams , the handbrake shoes need slackening off , there is a rubber bung on the front face of the bell , remove it , and you will see an adjuster , put a flat head screw driver through the hole and turn the adjuster to slacken the shoes off , the discs will come straight off then.

Just adjust the handbrake back up when you fit the new discs on

Cheers Ian

Hi Ian,

ended up using a couple of 8mm bolts in the thread holes on the disc, tightened them up and they came straight off.

whats the turn around for discs if I was to order them early tomorrow afternoon ?. Would I get them by Friday/Saturday ?

Cheers

All in stock for a next day delivery , sending friday for a saturday delivery are more expensive though.

You need to be carefull threading bolts into those holes to get the discs off , if it's the handbrake shoes holding them off , if you pull the discs off with two bolts will pull the handbrake shoes off causing damage
Cheers Ian

Ok. Latest I'll speak to you tomorrow for a Friday delivery if it was possible.

i managed to get them off no problem with the 2 bolts. The hubs etc seems fine so far fingers crossed.

cheers Ian