Rear Brembos on WRX 2006
 

Can anyone tell me what's needed for the swap on a 2006 WRX? I already have the rear Brembo's and 5x100 discs ready


I found this on another forum but he said you need nothing then says you need an adapter.


02-05 WRX will require the adapter bracket, readily available from Kartboy to use brembos on the rear.
06-07 WRX requires nothing, the calipers will bolt right up.

regardless, all WRXs need WRX adapter rotors to ensure the emergency brake works properly. DBA is currently the only manufacturer that makes them. The part number is DBA 2657.

Thanks in advance :)

Im sure you need the adaptors for the handbrake, Ian at Godspeed brakes does them

Hi
You don't need brackets as the calipers bolt straight to the hubs , you will either need thicker handbrake shoes, or the discs we do with the reducer sleeve fitted
Cheers Ian
01656 723060

Speak to Nikon man i sold him my rear set up and he fit them to his wrx

They were for the hatch wrx , they are different and won't fit the earlier cars

Sorry to jump in on this but I've just bought a pair of sti hatch rear brembos. Question is though, if I was to buy a pair of brake discs that fit the sti hatch, will they fit onto my wrx ? As I've heard that the hatch sti brake discs have the option of both 5x100 and 114.3 fitment.

Thanks

Hi
The hatch sti discs and calipers will only fit on a hatch wrx , the hatch sti brembos will not fit on a pre 2007 wrx
You need the gold brembos to fit
Cheers ian

Hello Godspeed,

So if I was to buy a pair of hatch sti brembo brake discs specific for a hatch sti rather ones that have come straight of a hatch they will fit my wrx then ?. Only reason I'm asking is because I've had a look on a couple of sites using a mates reg off his sti hatch. Will these fit mine then even though the pcd is different ?

The only other alternative is to have my discs drilled otherwise.

Hi
Do you have a wrx hatch ? If so you will need the sti hatch calipers discs and pads, and you need to drill the discs to suit your pcd
Very simple to do.

If you have a 2001 to 2007 wrx , the hatch sti rear brakes wont fit , you will need the 01 to 07 sti rear brakes and fit the thicker handbrake shoes as well

Hi Ian,

Yeah I have the hatch wrx. Funnily enough when I changed my fronts to sti hatch brembos I ended up buying the sti front discs using a mates sti hatch registration number from eurocarparts and they fitted perfectly. Wondering whether it would be the same for the rears! If not, like you said I can have them drilled.

Just out of interest Ian! What needs to be done to have them drilled if I come to it!?

Euro car parts gave you the wrong discs then , all the STi's from 2001 to date , use the same disc , the only difference is , in 2004/2005 they changed the wheel stud pattern from 5 x 100mm to 5 x 114.3mm , so if you bought hatch STi front discs , they would need re-drilling to a 5 x 100mm PCD to fit the hatch WRX , the STi hatch discs will not fit.

Its very simple , they just need 5 more holes drilled on a 5 x 100mm PCD in the middle of the 5 holes already there.

We do it , and charge £25 a pair , you should be able to get it done at a local machine shop , or you can send them to us , but the shipping both ways adds to the cost , or if you're local'ish , bring them to us and we'll do them while you wait

Cheers Ian

Hmmm that's strange, because I've had the discs on me car for the last 3/4 weeks from an sti hatch and I haven't had any problems. Not saying you're wrong or anything Ian.

They are not hatch discs , I'm not wrong ;) , the discs they have supplied you are 2001 to 2004 STi front discs , they are identical apart from the stud pattern.

I'd like to think I know Impreza brakes better than someone working at the counter in euro car parts :thumb: :D

Cheers Ian

Oh god yeah! I wasn't just glad that they fit! Less problems for me then :)